AutoParts

V30031771 Blower Motor for MERCEDES-BENZ

Blower Motor — V30031771. MERCEDES-BENZ. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
V30031771
Supplier SKU
6232-068
Vehicle application
MERCEDES-BENZ
Part type
Blower Motor
Send an inquiry

Key references

OE reference
V30031771
Supplier SKU
6232-068
Vehicle application
MERCEDES-BENZ
Part type
Blower Motor

Product specifications

OE referenceV30031771
Supplier SKU6232-068
Vehicle applicationMERCEDES-BENZ
Vehicle makeMERCEDES-BENZ
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbersA2108206742

Product details

V30031771 Automotive Blower Motor Overview

The V30031771 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6232-068, When the climate-control circuit commands V30031771 airflow, the electric motor rotates the V30031771 fan wheel inside the HVAC housing. Use 6232-068 when comparing this V30031771 airflow configuration.

OE Reference and Application

The primary catalogue number is V30031771 . The recorded application is MERCEDES-BENZ. For 6232-068, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6232-068 with the approved OE reference.

HVAC Interface and V30031771 installation

During work on 6232-068, If V30031771 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the V30031771 motor is the only cause. Recheck 6232-068 before the lower trim is closed.

For item 6232-068, confirm that the V30031771 centrifugal wheel clears its housing and that the 6232-068 connector lock engages without force. After seating 6232-068, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-068.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: V30031771

Cross-reference numbers: A2108206742

Vehicle brand: MERCEDES-BENZ

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

V30031771 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6232-068, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6232-068 record remains the picking reference.

For trade item 6232-068, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6232-068 on the packing instruction.

Frequently Asked Questions

How should item 6232-068 and blower number V30031771 be verified?

Match 6232-068 to the complete V30031771 marking, then compare the 6232-068 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.

Can 6232-068 have more than one vehicle-side blower configuration?

Yes. MERCEDES-BENZ production changes can affect 6232-068; confirm steering position, climate-control specification and the original 6232-068 geometry before approval.

What circuit checks are useful when 6232-068 does not operate?

For 6232-068, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-068 motor again.

Which details should accompany a wholesale request for 6232-068?

Provide item 6232-068, OE V30031771, the stated application, quantity and destination; add 6232-068 carton or private-label requirements separately.

How can noise be avoided after fitting 6232-068?

Clear debris from the air inlet, check that the 6232-068 wheel turns freely, seat the 6232-068 flange evenly and keep wiring away from the impeller.

Request a quote for 6232-068: Send V30031771, the 6232-068 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.