AutoParts
UR83-61-B10 Blower Motor for MAZDA BT-50
Blower Motor — UR83-61-B10. MAZDA BT-50. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- UR83-61-B10
- Supplier SKU
- 6206-005
- Vehicle application
- MAZDA BT-50
- Part type
- Blower Motor
Key references
- OE reference
- UR83-61-B10
- Supplier SKU
- 6206-005
- Vehicle application
- MAZDA BT-50
- Part type
- Blower Motor
Product specifications
| OE reference | UR83-61-B10 |
|---|---|
| Supplier SKU | 6206-005 |
| Vehicle application | MAZDA BT-50 |
| Vehicle make | MAZDA |
| Vehicle model | BT-50 |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | UR83-61-B10 |
Product details
UR83-61-B10 Automotive Blower Motor Overview
This listing links UR83-61-B10 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6206-005, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-005 when comparing this UR83-61-B10 airflow configuration.
OE Reference and Application
The primary catalogue number is UR83-61-B10 . The recorded application is MAZDA BT-50. For 6206-005, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-005 with the approved OE reference.
HVAC Interface and UR83-61-B10 installation
During work on 6206-005, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after UR83-61-B10 installation. Recheck 6206-005 before the lower trim is closed.
For item 6206-005, confirm that the UR83-61-B10 centrifugal wheel clears its housing and that the 6206-005 connector lock engages without force. After seating 6206-005, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-005.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: UR83-61-B10
Cross-reference numbers: UR83-61-B10
Vehicle brand: MAZDA
Vehicle model: BT-50
Model year: Confirm by OE reference
UR83-61-B10 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6206-005, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-005 record remains the picking reference.
For trade item 6206-005, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6206-005 on the packing instruction.
Frequently Asked Questions
How should item 6206-005 and blower number UR83-61-B10 be verified?
Match 6206-005 to the complete UR83-61-B10 marking, then compare the 6206-005 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-005 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-005; confirm steering position, climate-control specification and the original 6206-005 geometry before approval.
What circuit checks are useful when 6206-005 does not operate?
For 6206-005, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-005 motor again.
Which details should accompany a wholesale request for 6206-005?
Provide item 6206-005, OE UR83-61-B10, the stated application, quantity and destination; add 6206-005 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-005?
Clear debris from the air inlet, check that the 6206-005 wheel turns freely, seat the 6206-005 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-005: Send UR83-61-B10, the 6206-005 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.