UC9P-61-D80 Blower Motor for MAZDA BT-50 2015

UC9P-61-D80 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use UC9P-61-D80 together with the UC9P-61-D80 product images and vehicle data on this page.

For catalogue item 6206-007, the UC9P-61-D80 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6206-007 when comparing this UC9P-61-D80 airflow configuration.

OE Reference and Application

The primary catalogue number is UC9P-61-D80 . The recorded application is MAZDA BT-50 2015. For 6206-007, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6206-007 with the approved OE reference.

HVAC Interface and UC9P-61-D80 installation

During work on 6206-007, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6206-007 before the lower trim is closed.

For item 6206-007, confirm that the UC9P-61-D80 centrifugal wheel clears its housing and that the 6206-007 connector lock engages without force. After seating 6206-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-007.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: UC9P-61-D80

Cross-reference numbers: 264457 / 971133X700 / 971132Y500 / 87816

Vehicle brand: MAZDA

Vehicle model: BT-50

Model year: 2015

UC9P-61-D80 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6206-007, Packing preparation accounts for the UC9P-61-D80 motor weight and wheel shape to reduce movement inside the carton. The 6206-007 record remains the picking reference.

For trade item 6206-007, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6206-007 on the packing instruction.

Frequently Asked Questions

How should item 6206-007 and blower number UC9P-61-D80 be verified?

Match 6206-007 to the complete UC9P-61-D80 marking, then compare the 6206-007 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.

Can 6206-007 have more than one vehicle-side blower configuration?

Yes. MAZDA production changes can affect 6206-007; confirm steering position, climate-control specification and the original 6206-007 geometry before approval.

What circuit checks are useful when 6206-007 does not operate?

For 6206-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-007 motor again.

Which details should accompany a wholesale request for 6206-007?

Provide item 6206-007, OE UC9P-61-D80, the stated application, quantity and destination; add 6206-007 carton or private-label requirements separately.

How can noise be avoided after fitting 6206-007?

Clear debris from the air inlet, check that the 6206-007 wheel turns freely, seat the 6206-007 flange evenly and keep wiring away from the impeller.

Request a quote for 6206-007: Send UC9P-61-D80, the 6206-007 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country