AutoParts

PM3344 Blower Motor for FORD

Blower Motor — PM3344. FORD. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
PM3344
Supplier SKU
6217-062
Vehicle application
FORD
Part type
Blower Motor
Send an inquiry

Key references

OE reference
PM3344
Supplier SKU
6217-062
Vehicle application
FORD
Part type
Blower Motor

Product specifications

OE referencePM3344
Supplier SKU6217-062
Vehicle applicationFORD
Vehicle makeFORD
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers35009 / 18504AA / 3010008 / 3126113 / 44-1130

Product details

PM3344 Automotive Blower Motor Overview

This page records the pictured HVAC blower motor under OE reference PM3344 for application-led sourcing.

For catalogue item 6217-062, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6217-062 when comparing this PM3344 airflow configuration.

OE Reference and Application

The primary catalogue number is PM3344 . The recorded application is FORD. For 6217-062, Measure the PM3344 wheel height and outer diameter, then compare the electrical socket and base contour with the PM3344 product photos. Record 6217-062 with the approved OE reference.

HVAC Interface and PM3344 installation

During work on 6217-062, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after PM3344 installation. Recheck 6217-062 before the lower trim is closed.

For item 6217-062, confirm that the PM3344 centrifugal wheel clears its housing and that the 6217-062 connector lock engages without force. After seating 6217-062, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6217-062.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: PM3344

Cross-reference numbers: 35009 / 18504AA / 3010008 / 3126113 / 44-1130

Vehicle brand: FORD

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

PM3344 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6217-062, Packing preparation accounts for the PM3344 motor weight and wheel shape to reduce movement inside the carton. The 6217-062 record remains the picking reference.

For trade item 6217-062, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6217-062 on the packing instruction.

Frequently Asked Questions

How should item 6217-062 and blower number PM3344 be verified?

Match 6217-062 to the complete PM3344 marking, then compare the 6217-062 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6217-062 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6217-062; confirm steering position, climate-control specification and the original 6217-062 geometry before approval.

What circuit checks are useful when 6217-062 does not operate?

For 6217-062, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6217-062 motor again.

Which details should accompany a wholesale request for 6217-062?

Provide item 6217-062, OE PM3344, the stated application, quantity and destination; add 6217-062 carton or private-label requirements separately.

How can noise be avoided after fitting 6217-062?

Clear debris from the air inlet, check that the 6217-062 wheel turns freely, seat the 6217-062 flange evenly and keep wiring away from the impeller.

Request a quote for 6217-062: Send PM3344, the 6217-062 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.