AutoParts
PM249 Blower Motor for FORD F-150
Blower Motor — PM249. FORD F-150. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- PM249
- Supplier SKU
- 6203-084
- Vehicle application
- FORD F-150
- Part type
- Blower Motor
Key references
- OE reference
- PM249
- Supplier SKU
- 6203-084
- Vehicle application
- FORD F-150
- Part type
- Blower Motor
Product specifications
| OE reference | PM249 |
|---|---|
| Supplier SKU | 6203-084 |
| Vehicle application | FORD F-150 |
| Vehicle make | FORD |
| Vehicle model | F-150 |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 35474 / PM249CB / 35475 / 334736 / 4114049 / 3502998 / 3744953 / 4163760 |
Product details
PM249 Automotive Blower Motor Overview
This listing links PM249 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6203-084, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-084 when comparing this PM249 airflow configuration.
OE Reference and Application
The primary catalogue number is PM249 . The recorded application is FORD F-150. For 6203-084, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-084 with the approved OE reference.
HVAC Interface and PM249 installation
During work on 6203-084, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after PM249 installation. Recheck 6203-084 before the lower trim is closed.
For item 6203-084, confirm that the PM249 centrifugal wheel clears its housing and that the 6203-084 connector lock engages without force. After seating 6203-084, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-084.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: PM249
Cross-reference numbers: 35474 / PM249CB / 35475 / 334736 / 4114049 / 3502998 / 3744953 / 4163760
Vehicle brand: FORD
Vehicle model: F-150
Model year: Confirm by OE reference
PM249 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6203-084, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-084 record remains the picking reference.
For trade item 6203-084, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-084 on the packing instruction.
Frequently Asked Questions
How should item 6203-084 and blower number PM249 be verified?
Match 6203-084 to the complete PM249 marking, then compare the 6203-084 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-084 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-084; confirm steering position, climate-control specification and the original 6203-084 geometry before approval.
What circuit checks are useful when 6203-084 does not operate?
For 6203-084, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-084 motor again.
Which details should accompany a wholesale request for 6203-084?
Provide item 6203-084, OE PM249, the stated application, quantity and destination; add 6203-084 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-084?
Clear debris from the air inlet, check that the 6203-084 wheel turns freely, seat the 6203-084 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-084: Send PM249, the 6203-084 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.