PM141 Blower Motor for BUICK Electra

PM141 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by PM141 to support OE-number comparison before purchase.

For catalogue item 6208-057, Cabin PM141 airflow depends on the PM141 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-057 when comparing this PM141 airflow configuration.

OE Reference and Application

The primary catalogue number is PM141 . The recorded application is BUICK Electra. For 6208-057, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-057 with the approved OE reference.

HVAC Interface and PM141 installation

During work on 6208-057, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-057 before the lower trim is closed.

For item 6208-057, confirm that the PM141 centrifugal wheel clears its housing and that the 6208-057 connector lock engages without force. After seating 6208-057, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-057.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: PM141

Cross-reference numbers: 35337 / BM0141C / 100032 / 11337 / 1800136 / 2311257

Vehicle brand: BUICK

Vehicle model: Electra

Model year: Confirm by OE reference

PM141 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-057, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6208-057 record remains the picking reference.

For trade item 6208-057, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6208-057 on the packing instruction.

Frequently Asked Questions

How should item 6208-057 and blower number PM141 be verified?

Match 6208-057 to the complete PM141 marking, then compare the 6208-057 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-057 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-057; confirm steering position, climate-control specification and the original 6208-057 geometry before approval.

What circuit checks are useful when 6208-057 does not operate?

For 6208-057, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-057 motor again.

Which details should accompany a wholesale request for 6208-057?

Provide item 6208-057, OE PM141, the stated application, quantity and destination; add 6208-057 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-057?

Clear debris from the air inlet, check that the 6208-057 wheel turns freely, seat the 6208-057 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-057: Send PM141, the 6208-057 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country