AutoParts

PF2A2 Blower Motor for PEUGEOT

Blower Motor — PF2A2. PEUGEOT. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
PF2A2
Supplier SKU
6204-073
Vehicle application
PEUGEOT
Part type
Blower Motor
Send an inquiry

Key references

OE reference
PF2A2
Supplier SKU
6204-073
Vehicle application
PEUGEOT
Part type
Blower Motor

Product specifications

OE referencePF2A2
Supplier SKU6204-073
Vehicle applicationPEUGEOT
Vehicle makePEUGEOT
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers273241301154 / 8EW009157541 / KM3701 / 740730N / 6441S6

Product details

PF2A2 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by PF2A2 to support OE-number comparison before purchase.

For catalogue item 6204-073, Cabin PF2A2 airflow depends on the PF2A2 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6204-073 when comparing this PF2A2 airflow configuration.

OE Reference and Application

The primary catalogue number is PF2A2 . The recorded application is PEUGEOT. For 6204-073, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6204-073 with the approved OE reference.

HVAC Interface and PF2A2 installation

During work on 6204-073, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6204-073 before the lower trim is closed.

For item 6204-073, confirm that the PF2A2 centrifugal wheel clears its housing and that the 6204-073 connector lock engages without force. After seating 6204-073, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-073.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: PF2A2

Cross-reference numbers: 273241301154 / 8EW009157541 / KM3701 / 740730N / 6441S6

Vehicle brand: PEUGEOT

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

PF2A2 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6204-073, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-073 record remains the picking reference.

For trade item 6204-073, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6204-073 on the packing instruction.

Frequently Asked Questions

How should item 6204-073 and blower number PF2A2 be verified?

Match 6204-073 to the complete PF2A2 marking, then compare the 6204-073 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.

Can 6204-073 have more than one vehicle-side blower configuration?

Yes. PEUGEOT production changes can affect 6204-073; confirm steering position, climate-control specification and the original 6204-073 geometry before approval.

What circuit checks are useful when 6204-073 does not operate?

For 6204-073, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-073 motor again.

Which details should accompany a wholesale request for 6204-073?

Provide item 6204-073, OE PF2A2, the stated application, quantity and destination; add 6204-073 carton or private-label requirements separately.

How can noise be avoided after fitting 6204-073?

Clear debris from the air inlet, check that the 6204-073 wheel turns freely, seat the 6204-073 flange evenly and keep wiring away from the impeller.

Request a quote for 6204-073: Send PF2A2, the 6204-073 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.