LFH Blower Motor for NISSAN

LFH Automotive Blower Motor Overview

Reference LFH identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6205-105, the LFH blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-105 when comparing this LFH airflow configuration.

OE Reference and Application

The primary catalogue number is LFH . The recorded application is NISSAN. For 6205-105, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-105 with the approved OE reference.

HVAC Interface and LFH installation

During work on 6205-105, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-105 before the lower trim is closed.

For item 6205-105, confirm that the LFH centrifugal wheel clears its housing and that the 6205-105 connector lock engages without force. After seating 6205-105, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-105.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: LFH

Cross-reference numbers: 1416 / 27236-BN010 / 27226-BN000 / 27230-AV000 / 27230-8M200

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

LFH installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-105, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-105 record remains the picking reference.

For trade item 6205-105, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-105 on the packing instruction.

Frequently Asked Questions

How should item 6205-105 and blower number LFH be verified?

Match 6205-105 to the complete LFH marking, then compare the 6205-105 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-105 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-105; confirm steering position, climate-control specification and the original 6205-105 geometry before approval.

What circuit checks are useful when 6205-105 does not operate?

For 6205-105, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-105 motor again.

Which details should accompany a wholesale request for 6205-105?

Provide item 6205-105, OE LFH, the stated application, quantity and destination; add 6205-105 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-105?

Clear debris from the air inlet, check that the 6205-105 wheel turns freely, seat the 6205-105 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-105: Send LFH, the 6205-105 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country