AutoParts

KM12674 Blower Motor for NISSAN

Blower Motor — KM12674. NISSAN. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
KM12674
Supplier SKU
6205-071
Vehicle application
NISSAN
Part type
Blower Motor
Send an inquiry

Key references

OE reference
KM12674
Supplier SKU
6205-071
Vehicle application
NISSAN
Part type
Blower Motor

Product specifications

OE referenceKM12674
Supplier SKU6205-071
Vehicle applicationNISSAN
Vehicle makeNISSAN
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers27220-WL000

Product details

KM12674 Automotive Blower Motor Overview

Use KM12674 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.

For catalogue item 6205-071, Cabin KM12674 airflow depends on the KM12674 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-071 when comparing this KM12674 airflow configuration.

OE Reference and Application

The primary catalogue number is KM12674 . The recorded application is NISSAN. For 6205-071, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6205-071 with the approved OE reference.

HVAC Interface and KM12674 installation

During work on 6205-071, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-071 before the lower trim is closed.

For item 6205-071, confirm that the KM12674 centrifugal wheel clears its housing and that the 6205-071 connector lock engages without force. After seating 6205-071, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-071.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: KM12674

Cross-reference numbers: 27220-WL000

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

KM12674 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-071, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6205-071 record remains the picking reference.

For trade item 6205-071, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6205-071 on the packing instruction.

Frequently Asked Questions

How should item 6205-071 and blower number KM12674 be verified?

Match 6205-071 to the complete KM12674 marking, then compare the 6205-071 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-071 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-071; confirm steering position, climate-control specification and the original 6205-071 geometry before approval.

What circuit checks are useful when 6205-071 does not operate?

For 6205-071, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-071 motor again.

Which details should accompany a wholesale request for 6205-071?

Provide item 6205-071, OE KM12674, the stated application, quantity and destination; add 6205-071 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-071?

Clear debris from the air inlet, check that the 6205-071 wheel turns freely, seat the 6205-071 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-071: Send KM12674, the 6205-071 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.