JGC500030 Blower Motor for LAND ROVER

JGC500030 Automotive Blower Motor Overview

This product entry documents the JGC500030 blower unit with practical identification and JGC500030 installation checkpoints.

For catalogue item 6238-014, Stable wheel rotation helps distribute air without relying on vehicle speed, making the JGC500030 blower important at idle and in traffic. Use 6238-014 when comparing this JGC500030 airflow configuration.

OE Reference and Application

The primary catalogue number is JGC500030 . The recorded application is LAND ROVER. For 6238-014, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6238-014 with the approved OE reference.

HVAC Interface and JGC500030 installation

During work on 6238-014, After JGC500030 installation, operate low through high speed and confirm JGC500030 airflow reaches the selected vents without abnormal vibration. Recheck 6238-014 before the lower trim is closed.

For item 6238-014, confirm that the JGC500030 centrifugal wheel clears its housing and that the 6238-014 connector lock engages without force. After seating 6238-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6238-014.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: JGC500030

Cross-reference numbers: 715230 / AU8230

Vehicle brand: LAND ROVER

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

JGC500030 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6238-014, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6238-014 record remains the picking reference.

For trade item 6238-014, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6238-014 on the packing instruction.

Frequently Asked Questions

How should item 6238-014 and blower number JGC500030 be verified?

Match 6238-014 to the complete JGC500030 marking, then compare the 6238-014 plug, terminal count, mounting flange and wheel dimensions with the removed LAND ROVER unit.

Can 6238-014 have more than one vehicle-side blower configuration?

Yes. LAND ROVER production changes can affect 6238-014; confirm steering position, climate-control specification and the original 6238-014 geometry before approval.

What circuit checks are useful when 6238-014 does not operate?

For 6238-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6238-014 motor again.

Which details should accompany a wholesale request for 6238-014?

Provide item 6238-014, OE JGC500030, the stated application, quantity and destination; add 6238-014 carton or private-label requirements separately.

How can noise be avoided after fitting 6238-014?

Clear debris from the air inlet, check that the 6238-014 wheel turns freely, seat the 6238-014 flange evenly and keep wiring away from the impeller.

Request a quote for 6238-014: Send JGC500030, the 6238-014 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country