AutoParts
HB111BJS7-03 Blower Motor for MAZDA
Blower Motor — HB111BJS7-03. MAZDA. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- HB111BJS7-03
- Supplier SKU
- 6206-028
- Vehicle application
- MAZDA
- Part type
- Blower Motor
Key references
- OE reference
- HB111BJS7-03
- Supplier SKU
- 6206-028
- Vehicle application
- MAZDA
- Part type
- Blower Motor
Product specifications
| OE reference | HB111BJS7-03 |
|---|---|
| Supplier SKU | 6206-028 |
| Vehicle application | MAZDA |
| Vehicle make | MAZDA |
| Vehicle model | Confirm by OE reference |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 8727001530 / HB111BJS7-00 |
Product details
HB111BJS7-03 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference HB111BJS7-03 for application-led sourcing.
For catalogue item 6206-028, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-028 when comparing this HB111BJS7-03 airflow configuration.
OE Reference and Application
The primary catalogue number is HB111BJS7-03 . The recorded application is MAZDA. For 6206-028, Measure the HB111BJS7-03 wheel height and outer diameter, then compare the electrical socket and base contour with the HB111BJS7-03 product photos. Record 6206-028 with the approved OE reference.
HVAC Interface and HB111BJS7-03 installation
During work on 6206-028, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after HB111BJS7-03 installation. Recheck 6206-028 before the lower trim is closed.
For item 6206-028, confirm that the HB111BJS7-03 centrifugal wheel clears its housing and that the 6206-028 connector lock engages without force. After seating 6206-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-028.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: HB111BJS7-03
Cross-reference numbers: 8727001530 / HB111BJS7-00
Vehicle brand: MAZDA
Vehicle model: Confirm by OE reference
Model year: Confirm by OE reference
HB111BJS7-03 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6206-028, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6206-028 record remains the picking reference.
For trade item 6206-028, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6206-028 on the packing instruction.
Frequently Asked Questions
How should item 6206-028 and blower number HB111BJS7-03 be verified?
Match 6206-028 to the complete HB111BJS7-03 marking, then compare the 6206-028 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.
Can 6206-028 have more than one vehicle-side blower configuration?
Yes. MAZDA production changes can affect 6206-028; confirm steering position, climate-control specification and the original 6206-028 geometry before approval.
What circuit checks are useful when 6206-028 does not operate?
For 6206-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-028 motor again.
Which details should accompany a wholesale request for 6206-028?
Provide item 6206-028, OE HB111BJS7-03, the stated application, quantity and destination; add 6206-028 carton or private-label requirements separately.
How can noise be avoided after fitting 6206-028?
Clear debris from the air inlet, check that the 6206-028 wheel turns freely, seat the 6206-028 flange evenly and keep wiring away from the impeller.
Request a quote for 6206-028: Send HB111BJS7-03, the 6206-028 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.