GK3J-61-B10C Blower Motor for MAZDA 6

GK3J-61-B10C Automotive Blower Motor Overview

Reference GK3J-61-B10C identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6206-017, the GK3J-61-B10C blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6206-017 when comparing this GK3J-61-B10C airflow configuration.

OE Reference and Application

The primary catalogue number is GK3J-61-B10C . The recorded application is MAZDA 6. For 6206-017, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6206-017 with the approved OE reference.

HVAC Interface and GK3J-61-B10C installation

During work on 6206-017, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6206-017 before the lower trim is closed.

For item 6206-017, confirm that the GK3J-61-B10C centrifugal wheel clears its housing and that the 6206-017 connector lock engages without force. After seating 6206-017, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-017.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: GK3J-61-B10C

Cross-reference numbers: GKKF61-B10 / 939780D / 615-58768

Vehicle brand: MAZDA

Vehicle model: 6

Model year: Confirm by OE reference

GK3J-61-B10C installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6206-017, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-017 record remains the picking reference.

For trade item 6206-017, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6206-017 on the packing instruction.

Frequently Asked Questions

How should item 6206-017 and blower number GK3J-61-B10C be verified?

Match 6206-017 to the complete GK3J-61-B10C marking, then compare the 6206-017 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.

Can 6206-017 have more than one vehicle-side blower configuration?

Yes. MAZDA production changes can affect 6206-017; confirm steering position, climate-control specification and the original 6206-017 geometry before approval.

What circuit checks are useful when 6206-017 does not operate?

For 6206-017, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-017 motor again.

Which details should accompany a wholesale request for 6206-017?

Provide item 6206-017, OE GK3J-61-B10C, the stated application, quantity and destination; add 6206-017 carton or private-label requirements separately.

How can noise be avoided after fitting 6206-017?

Clear debris from the air inlet, check that the 6206-017 wheel turns freely, seat the 6206-017 flange evenly and keep wiring away from the impeller.

Request a quote for 6206-017: Send GK3J-61-B10C, the 6206-017 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country