GHR161B10 Blower Motor for MAZDA 6 2014-2017

GHR161B10 Automotive Blower Motor Overview

This listing links GHR161B10 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6206-010, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-010 when comparing this GHR161B10 airflow configuration.

OE Reference and Application

The primary catalogue number is GHR161B10 . The recorded application is MAZDA 6 2014-2017. For 6206-010, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-010 with the approved OE reference.

HVAC Interface and GHR161B10 installation

During work on 6206-010, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after GHR161B10 installation. Recheck 6206-010 before the lower trim is closed.

For item 6206-010, confirm that the GHR161B10 centrifugal wheel clears its housing and that the 6206-010 connector lock engages without force. After seating 6206-010, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-010.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: GHR161B10

Cross-reference numbers: BM10039C / 8727005760 / HB111DN2002 / GME661B10 / 700332

Vehicle brand: MAZDA

Vehicle model: 6

Model year: 2014-2017

GHR161B10 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6206-010, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-010 record remains the picking reference.

For trade item 6206-010, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6206-010 on the packing instruction.

Frequently Asked Questions

How should item 6206-010 and blower number GHR161B10 be verified?

Match 6206-010 to the complete GHR161B10 marking, then compare the 6206-010 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.

Can 6206-010 have more than one vehicle-side blower configuration?

Yes. MAZDA production changes can affect 6206-010; confirm steering position, climate-control specification and the original 6206-010 geometry before approval.

What circuit checks are useful when 6206-010 does not operate?

For 6206-010, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-010 motor again.

Which details should accompany a wholesale request for 6206-010?

Provide item 6206-010, OE GHR161B10, the stated application, quantity and destination; add 6206-010 carton or private-label requirements separately.

How can noise be avoided after fitting 6206-010?

Clear debris from the air inlet, check that the 6206-010 wheel turns freely, seat the 6206-010 flange evenly and keep wiring away from the impeller.

Request a quote for 6206-010: Send GHR161B10, the 6206-010 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country