FW936001 Blower Motor for VOLKSWAGEN Polo

FW936001 Automotive Blower Motor Overview

This listing links FW936001 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6220-049, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6220-049 when comparing this FW936001 airflow configuration.

OE Reference and Application

The primary catalogue number is FW936001 . The recorded application is VOLKSWAGEN Polo. For 6220-049, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6220-049 with the approved OE reference.

HVAC Interface and FW936001 installation

During work on 6220-049, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after FW936001 installation. Recheck 6220-049 before the lower trim is closed.

For item 6220-049, confirm that the FW936001 centrifugal wheel clears its housing and that the 6220-049 connector lock engages without force. After seating 6220-049, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6220-049.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: FW936001

Cross-reference numbers: 2Q1820021 / 25711

Vehicle brand: VOLKSWAGEN

Vehicle model: Polo

Model year: Confirm by OE reference

FW936001 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6220-049, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6220-049 record remains the picking reference.

For trade item 6220-049, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6220-049 on the packing instruction.

Frequently Asked Questions

How should item 6220-049 and blower number FW936001 be verified?

Match 6220-049 to the complete FW936001 marking, then compare the 6220-049 plug, terminal count, mounting flange and wheel dimensions with the removed VOLKSWAGEN unit.

Can 6220-049 have more than one vehicle-side blower configuration?

Yes. VOLKSWAGEN production changes can affect 6220-049; confirm steering position, climate-control specification and the original 6220-049 geometry before approval.

What circuit checks are useful when 6220-049 does not operate?

For 6220-049, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6220-049 motor again.

Which details should accompany a wholesale request for 6220-049?

Provide item 6220-049, OE FW936001, the stated application, quantity and destination; add 6220-049 carton or private-label requirements separately.

How can noise be avoided after fitting 6220-049?

Clear debris from the air inlet, check that the 6220-049 wheel turns freely, seat the 6220-049 flange evenly and keep wiring away from the impeller.

Request a quote for 6220-049: Send FW936001, the 6220-049 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country