F27H19805AB Blower Motor for FORD Explorer

F27H19805AB Automotive Blower Motor Overview

Reference F27H19805AB identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6203-101, the F27H19805AB blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-101 when comparing this F27H19805AB airflow configuration.

OE Reference and Application

The primary catalogue number is F27H19805AB . The recorded application is FORD Explorer. For 6203-101, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6203-101 with the approved OE reference.

HVAC Interface and F27H19805AB installation

During work on 6203-101, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-101 before the lower trim is closed.

For item 6203-101, confirm that the F27H19805AB centrifugal wheel clears its housing and that the 6203-101 connector lock engages without force. After seating 6203-101, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-101.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: F27H19805AB

Cross-reference numbers: F2TZ19805B / TYC700151 / 35348 / 52499897 / 88918629 / PM240 / 655-1747

Vehicle brand: FORD

Vehicle model: Explorer

Model year: Confirm by OE reference

F27H19805AB installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-101, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-101 record remains the picking reference.

For trade item 6203-101, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-101 on the packing instruction.

Frequently Asked Questions

How should item 6203-101 and blower number F27H19805AB be verified?

Match 6203-101 to the complete F27H19805AB marking, then compare the 6203-101 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-101 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-101; confirm steering position, climate-control specification and the original 6203-101 geometry before approval.

What circuit checks are useful when 6203-101 does not operate?

For 6203-101, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-101 motor again.

Which details should accompany a wholesale request for 6203-101?

Provide item 6203-101, OE F27H19805AB, the stated application, quantity and destination; add 6203-101 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-101?

Clear debris from the air inlet, check that the 6203-101 wheel turns freely, seat the 6203-101 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-101: Send F27H19805AB, the 6203-101 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country