F1EZ-13008-GY Head Light for FORD Focus 2015 Right

Head Light Assembly Overview

The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference F1EZ-13008-GY for FORD Focus 2015, with the right position identified in the source record.

The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.

Lighting Function and Optical Configuration

Verify the number and position of optical chambers and confirm whether daytime lighting is integrated into the main housing.

For the Focus application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.

Vehicle Fitment and Body Interface

Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.

Inspect every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.

Connector and Control Hardware

Match the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.

Installation and Beam Alignment

Tighten the fasteners evenly, restore adjacent covers only after functional testing, and verify bonnet and bumper clearances one final time.

A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.

Automotive Lighting Product Specifications

Product type: Head Light Assembly

Primary OE reference: F1EZ-13008-GY

Cross-reference numbers: F1EZ-13008-GY

Internal item code: FD04001-082

Vehicle brand: FORD

Vehicle model: Focus

Model year: 2015

Installation position: Right front

Lighting configuration: version with integrated daytime running light

Wholesale Supply and Protective Packing

Mixed orders should establish vehicle application and side clearly, with protective packing around the optical face and electrical connections.

When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.

Application-Specific Comparison Notes

For this right FORD Focus headlamp, the version with integrated daytime running light specification should be assessed together with the 2015 body application. Use the original assembly to verify the shell profile, upper support shape and clearance around nearby trim before installation.

The right Focus lighting package should remain the reference during electrical review. Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.

When fitting the FORD Focus unit at the right front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore adjacent covers only after functional testing, and verify bonnet and bumper clearances one final time.

Frequently Asked Questions

How should the lamp be protected during shipping?

The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.

When is professional beam aiming required?

Beam alignment should be checked after the unit is secured and every lighting function has been tested.

Why must the rear housing be compared?

A similar lens can conceal a non-matching casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.

Are bulbs and electronic modules included?

The included components are those visible in the product photographs. Verify bulbs, caps, motors, ballasts and LED modules separately.

Can a headlamp be chosen by appearance alone?

No. The right lamp must also match the optical system, electrical interface, mounting features and market specification.

Housing comparison: Use the original assembly to review the shell profile, upper support shape and clearance around surrounding trim before installation.

Optical system: Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.

Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.

Mounting points: Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.

Installation guidance: After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.

Wholesale packing: Mixed orders should recognize vehicle application and side clearly, with protective packing around the optical face and electrical connections.

Application-specific focus: For the right FORD Focus application with version with integrated daytime running light, recognize whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.