F1EZ-13008-GX Head Light for FORD Focus 2015 Left

Head Light Assembly Overview

The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference F1EZ-13008-GX for FORD Focus 2015, with the left position identified in the source record.

The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.

Lighting Function and Optical Configuration

Verify that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.

For the Focus application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.

Vehicle Fitment and Body Interface

Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.

Check mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.

Connector and Control Hardware

Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.

Installation and Beam Alignment

After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.

A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.

Automotive Lighting Product Specifications

Product type: Head Light Assembly

Primary OE reference: F1EZ-13008-GX

Cross-reference numbers: F1EZ-13008-GX

Internal item code: FD04001-081

Vehicle brand: FORD

Vehicle model: Focus

Model year: 2015

Installation position: Left front

Lighting configuration: version with integrated daytime running light

Wholesale Supply and Protective Packing

Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.

When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.

Application-Specific Comparison Notes

For this left FORD Focus headlamp, the version with integrated daytime running light specification should be assessed together with the 2015 body application. Review the complete lamp body from several angles because a similar lens can conceal a non-matching rear casing or bracket offset.

The left Focus lighting package should remain the reference during electrical review. Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

When fitting the FORD Focus unit at the left front position, preserve even body gaps and the intended beam orientation. Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.

Frequently Asked Questions

How should the lamp be protected during shipping?

The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.

What photographs are useful for comparison?

Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.

How should headlamp fitment be confirmed?

For the left Focus lamp, compare the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.

When is professional beam aiming required?

Beam alignment should be checked after the unit is secured and every lighting function has been tested.

What information supports a wholesale quotation?

State the FORD Focus application, production year, left side, lighting version, quantity and delivery country.

Housing comparison: Lay the replacement beside the removed unit and review overall depth, edge returns, vent locations and rear-cover clearance.

Optical system: Confirm that the beam system and observable lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.

Electrical interface: Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.

Mounting points: Inspect mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.

Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.

Application-specific focus: For the left FORD Focus application with version with integrated daytime running light, verify the number and position of optical chambers and confirm whether daytime lighting is integrated into the main housing.