F1EB-13LO18-A Front Right Headlight Washer Nozzle Cover for FORD Focus 2015

F1EB-13LO18-A Front Right Headlight Washer Nozzle Cover Product Overview

The component shown under F1EB-13LO18-A is a front right headlight washer nozzle cover intended for FORD Focus 2015. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for Focus

Compatibility for F1EB-13LO18-A should be confirmed against FORD Focus 2015 and the right installation side. The review should compare the hose connection or cover hinge with the original part, review painted, primed and unpainted finish requirements, and check whether the original cover is supplied separately from its support. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, confirm the destination-market equipment specification, and verify that the OE reference is not for the opposite side; finally, confirm that the listed model designation matches the vehicle and use the full OE number, not a partial family reference.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of FD02010-002 should be checked separately. For this headlight washer nozzle cover, compare the distance between mounting points, inspect the hose connector for ovality, and check the nozzle outlet orientation. A direct comparison with the removed part should additionally review the left-to-right mirrored geometry, compare the retracted position with the bumper surface, and inspect the base bracket around every locating slot. Before the item is accepted, check the bumper-facing surface for transport marks and review any paint-preparation requirement before fitting.

OE Identification and Side Confirmation

F1EB-13LO18-A is the primary OE identity for this right front right headlight washer nozzle cover, while FD02010-002 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for FD02010-002 begins before the bumper area is disturbed: reconfirm the OE number before discarding the packaging and follow the vehicle workshop procedure for bumper removal. During trial fitting, reconfirm the OE number before discarding the packaging, follow the vehicle workshop procedure for bumper removal, and reconfirm the OE number before discarding the packaging. Before returning the vehicle to service, follow the vehicle workshop procedure for bumper removal, reconfirm the OE number before discarding the packaging, and follow the vehicle workshop procedure for bumper removal.

Receiving Inspection

When FD02010-002 arrives, receiving staff should check the cap hinge or retaining point for free movement, check the actuator body for straightness before trial installation, and review the production finish against the approved sample. Before workshop release, check the carton partition for evidence of part-to-part contact, inspect the fluid passage only with clean, non-damaging tools, match the item label to the purchase order and OE reference, and confirm the nozzle outlet is clean and unobstructed. Complete the inspection by ensuring that staff verify the cover contour against the approved product photograph, confirm that loose accessories are identified on the packing list, and verify the supplied scope before discarding dividers or inner bags.

Product Technical Specifications

Product type: Front Right Headlight Washer Nozzle Cover

Primary OE reference: F1EB-13LO18-A

Cross-reference numbers: F1EB-13LO18-A F1EB13LO18A

Internal item code: FD02010-002

Vehicle brand: FORD

Vehicle model: Focus

Model year: 2015

Installation position: Front bumper / headlamp washer area

Side / orientation: Right

Applicable vehicle: FORD Focus 2015

Wholesale Supply and Protective Packing

For a quotation or repeat order of F1EB-13LO18-A, please protect hose spigots and projecting tabs, identify painted and unpainted variants on separate lines, and request moisture protection for sea freight. Packing instructions should confirm sample requirements before a bulk order, protect each nozzle outlet from dust during transit, and confirm pallet requirements for larger quantities. Before dispatch, list model years and bumper versions for mixed orders and state the required order quantity.

Frequently Asked Questions

How should F1EB-13LO18-A be packed for export?

The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item FD02010-002, the approval should confirm whether the visible cover needs a primed or finished surface. The same item record should also use dividers to prevent caps from rubbing each other.

Which vehicle application is listed for F1EB-13LO18-A?

F1EB-13LO18-A is listed for FORD Focus 2015. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed FORD Focus 2015, technicians should match the connector and fluid inlet position where applicable. A workshop comparison should additionally confirm the front bumper option before ordering.

Which side uses F1EB-13LO18-A?

This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For the right-side order line, check the bumper-facing surface for transport marks. The order review should further check the nozzle outlet orientation.

Is F1EB-13LO18-A a complete headlight washer system?

No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for F1EB-13LO18-A should confirm sample requirements before a bulk order. Receiving staff should also state any outer-carton marking requirements.

Is workshop installation recommended for F1EB-13LO18-A?

Yes. A qualified workshop can access the bumper area on the Focus, transfer hoses or clips safely and test the washer system for correct operation and leaks. Before this headlight washer nozzle cover is accepted, check the headlamp lens receives an even spray. Before approval, the buyer or technician should tighten bracket hardware only after alignment.

Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.