DS73-8A194-AB Radiator Mounting Seat for 2013 Ford Mondeo

DS73-8A194-AB Radiator Mounting Seat Overview

DS73-8A194-AB is the listed radiator mounting seat for 2013 FORD Mondeo. This seat positions the cooling module and helps isolate it from direct metal-to-metal contact.

Product-Specific Fitment

Use the product photographs to compare formed locating seat with support interface and body attachment geometry. Inspect the mating stud, bracket or body opening because a similar-looking fastener may have a different pitch, shoulder or locating depth.

Workshop Installation Method

Place DS73-8A194-AB against the original body points before tightening. Confirm that its bends, support faces and cable or hose clearances match the removed carrier.

Functional Check After Assembly

After fitting, check that the supported component remains stable through its normal movement and temperature range. Recheck access for later service and verify nearby hoses or wiring are not pinched.

Warehouse Identification

Store SKU FD02042-010 under DS73-8A194-AB with the FORD Mondeo application and radiator support mounting point recorded on the bin label. Keep small threaded pieces bagged separately; protect formed brackets from stacking loads that could change their geometry.

Radiator Seat and Isolator Stack

Install the mounting seat with its original rubber cushion and orientation. The cooling module should be supported without hard contact against the body bracket, and the lower locating pins must remain centred. An incorrectly stacked isolator can transmit vibration or shift fan-to-shroud clearance.

Automotive Replacement Part Specifications

Product type: Radiator Mounting Seat

Primary OE reference: DS73-8A194-AB

Internal item code: FD02042-010

Vehicle brand: FORD

Model: Mondeo

Vehicle year: 2013

Applicable vehicle: 2013 FORD Mondeo

Installation position: Radiator support mounting point

Identification detail: formed locating seat with support interface and body attachment geometry

Cross-reference numbers: DS73-8A194-AB

Packing and Trade Supply

Protect threads and exposed locating ends with sleeves or caps. Pack SKU FD02042-010 so finished faces and bracket bends cannot rub against loose hardware in transit.

Frequently Asked Questions

What does DS73-8A194-AB identify?

DS73-8A194-AB identifies the stated radiator mounting seat for 2013 FORD Mondeo.

Which features should be compared for FD02042-010?

Check formed locating seat with support interface and body attachment geometry, then verify every thread, shoulder, hole and contact face.

Can a similar fastener be substituted?

Only after confirming dimensions, material function and the load carried by the mounting point.

What installation practice is recommended?

Dry-fit the support, preserve isolators and tighten compatible fasteners evenly.

What information is required for wholesale supply?

Provide DS73-8A194-AB, SKU FD02042-010, vehicle details, destination and order quantity.

Fitment basis: Match DS73-8A194-AB, thread or hole size, shoulder length and contact surface.

Installation guidance: Align the support without forcing it; fit original cushions and compatible fasteners in their recorded positions.

Purchase reference: Quote SKU FD02042-010, OE number, vehicle application and quantity.