DG9H-19846-AB Blower Motor for FORD Mondeo

DG9H-19846-AB Automotive Blower Motor Overview

This listing links DG9H-19846-AB with the supplied blower-motor geometry, connector and application information.

For catalogue item 6203-037, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-037 when comparing this DG9H-19846-AB airflow configuration.

OE Reference and Application

The primary catalogue number is DG9H-19846-AB . The recorded application is FORD Mondeo. For 6203-037, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-037 with the approved OE reference.

HVAC Interface and DG9H-19846-AB installation

During work on 6203-037, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after DG9H-19846-AB installation. Recheck 6203-037 before the lower trim is closed.

For item 6203-037, confirm that the DG9H-19846-AB centrifugal wheel clears its housing and that the 6203-037 connector lock engages without force. After seating 6203-037, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-037.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: DG9H-19846-AB

Cross-reference numbers: DG9H-19846-AA / DG9Z-19805-B / 7L4Z19805A / TYC700213 / 75817 / AY272700-6220 / 87419

Vehicle brand: FORD

Vehicle model: Mondeo

Model year: Confirm by OE reference

DG9H-19846-AB installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-037, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-037 record remains the picking reference.

For trade item 6203-037, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-037 on the packing instruction.

Frequently Asked Questions

How should item 6203-037 and blower number DG9H-19846-AB be verified?

Match 6203-037 to the complete DG9H-19846-AB marking, then compare the 6203-037 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-037 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-037; confirm steering position, climate-control specification and the original 6203-037 geometry before approval.

What circuit checks are useful when 6203-037 does not operate?

For 6203-037, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-037 motor again.

Which details should accompany a wholesale request for 6203-037?

Provide item 6203-037, OE DG9H-19846-AB, the stated application, quantity and destination; add 6203-037 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-037?

Clear debris from the air inlet, check that the 6203-037 wheel turns freely, seat the 6203-037 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-037: Send DG9H-19846-AB, the 6203-037 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country