DG80-61B10A Blower Motor for FORD Fiesta

DG80-61B10A Automotive Blower Motor Overview

This listing links DG80-61B10A with the supplied blower-motor geometry, connector and application information.

For catalogue item 6203-005, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-005 when comparing this DG80-61B10A airflow configuration.

OE Reference and Application

The primary catalogue number is DG80-61B10A . The recorded application is FORD Fiesta. For 6203-005, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-005 with the approved OE reference.

HVAC Interface and DG80-61B10A installation

During work on 6203-005, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after DG80-61B10A installation. Recheck 6203-005 before the lower trim is closed.

For item 6203-005, confirm that the DG80-61B10A centrifugal wheel clears its housing and that the 6203-005 connector lock engages without force. After seating 6203-005, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-005.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: DG80-61B10A

Cross-reference numbers: DG80-61B10A

Vehicle brand: FORD

Vehicle model: Fiesta

Model year: Confirm by OE reference

DG80-61B10A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-005, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-005 record remains the picking reference.

For trade item 6203-005, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6203-005 on the packing instruction.

Frequently Asked Questions

How should item 6203-005 and blower number DG80-61B10A be verified?

Match 6203-005 to the complete DG80-61B10A marking, then compare the 6203-005 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-005 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-005; confirm steering position, climate-control specification and the original 6203-005 geometry before approval.

What circuit checks are useful when 6203-005 does not operate?

For 6203-005, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-005 motor again.

Which details should accompany a wholesale request for 6203-005?

Provide item 6203-005, OE DG80-61B10A, the stated application, quantity and destination; add 6203-005 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-005?

Clear debris from the air inlet, check that the 6203-005 wheel turns freely, seat the 6203-005 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-005: Send DG80-61B10A, the 6203-005 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country