DEA09274 Blower Motor for PEUGEOT

DEA09274 Automotive Blower Motor Overview

Reference DEA09274 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6204-105, the DEA09274 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6204-105 when comparing this DEA09274 airflow configuration.

OE Reference and Application

The primary catalogue number is DEA09274 . The recorded application is PEUGEOT. For 6204-105, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6204-105 with the approved OE reference.

HVAC Interface and DEA09274 installation

During work on 6204-105, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6204-105 before the lower trim is closed.

For item 6204-105, confirm that the DEA09274 centrifugal wheel clears its housing and that the 6204-105 connector lock engages without force. After seating 6204-105, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-105.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: DEA09274

Cross-reference numbers: DEA09274

Vehicle brand: PEUGEOT

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

DEA09274 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6204-105, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-105 record remains the picking reference.

For trade item 6204-105, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-105 on the packing instruction.

Frequently Asked Questions

How should item 6204-105 and blower number DEA09274 be verified?

Match 6204-105 to the complete DEA09274 marking, then compare the 6204-105 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.

Can 6204-105 have more than one vehicle-side blower configuration?

Yes. PEUGEOT production changes can affect 6204-105; confirm steering position, climate-control specification and the original 6204-105 geometry before approval.

What circuit checks are useful when 6204-105 does not operate?

For 6204-105, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-105 motor again.

Which details should accompany a wholesale request for 6204-105?

Provide item 6204-105, OE DEA09274, the stated application, quantity and destination; add 6204-105 carton or private-label requirements separately.

How can noise be avoided after fitting 6204-105?

Clear debris from the air inlet, check that the 6204-105 wheel turns freely, seat the 6204-105 flange evenly and keep wiring away from the impeller.

Request a quote for 6204-105: Send DEA09274, the 6204-105 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country