DD0305TT Blower Motor for KIA

DD0305TT Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by DD0305TT to support OE-number comparison before purchase.

For catalogue item 6201-048, Cabin DD0305TT airflow depends on the DD0305TT motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6201-048 when comparing this DD0305TT airflow configuration.

OE Reference and Application

The primary catalogue number is DD0305TT . The recorded application is KIA. For 6201-048, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6201-048 with the approved OE reference.

HVAC Interface and DD0305TT installation

During work on 6201-048, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6201-048 before the lower trim is closed.

For item 6201-048, confirm that the DD0305TT centrifugal wheel clears its housing and that the 6201-048 connector lock engages without force. After seating 6201-048, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-048.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: DD0305TT

Cross-reference numbers: NRF34418 / DEA43003 / K92070 / KA8250 / 971093E000

Vehicle brand: KIA

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

DD0305TT installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-048, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-048 record remains the picking reference.

For trade item 6201-048, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6201-048 on the packing instruction.

Frequently Asked Questions

How should item 6201-048 and blower number DD0305TT be verified?

Match 6201-048 to the complete DD0305TT marking, then compare the 6201-048 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.

Can 6201-048 have more than one vehicle-side blower configuration?

Yes. KIA production changes can affect 6201-048; confirm steering position, climate-control specification and the original 6201-048 geometry before approval.

What circuit checks are useful when 6201-048 does not operate?

For 6201-048, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-048 motor again.

Which details should accompany a wholesale request for 6201-048?

Provide item 6201-048, OE DD0305TT, the stated application, quantity and destination; add 6201-048 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-048?

Clear debris from the air inlet, check that the 6201-048 wheel turns freely, seat the 6201-048 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-048: Send DD0305TT, the 6201-048 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country