AutoParts

C11-1343 Blower Motor for FORD

Blower Motor — C11-1343. FORD. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
C11-1343
Supplier SKU
6203-134
Vehicle application
FORD
Part type
Blower Motor
Send an inquiry

Key references

OE reference
C11-1343
Supplier SKU
6203-134
Vehicle application
FORD
Part type
Blower Motor

Product specifications

OE referenceC11-1343
Supplier SKU6203-134
Vehicle applicationFORD
Vehicle makeFORD
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbersA11-1343 / EM9010J

Product details

C11-1343 Automotive Blower Motor Overview

This product entry documents the C11-1343 blower unit with practical identification and C11-1343 installation checkpoints.

For catalogue item 6203-134, Stable wheel rotation helps distribute air without relying on vehicle speed, making the C11-1343 blower important at idle and in traffic. Use 6203-134 when comparing this C11-1343 airflow configuration.

OE Reference and Application

The primary catalogue number is C11-1343 . The recorded application is FORD. For 6203-134, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6203-134 with the approved OE reference.

HVAC Interface and C11-1343 installation

During work on 6203-134, After C11-1343 installation, operate low through high speed and confirm C11-1343 airflow reaches the selected vents without abnormal vibration. Recheck 6203-134 before the lower trim is closed.

For item 6203-134, confirm that the C11-1343 centrifugal wheel clears its housing and that the 6203-134 connector lock engages without force. After seating 6203-134, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-134.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: C11-1343

Cross-reference numbers: A11-1343 / EM9010J

Vehicle brand: FORD

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

C11-1343 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-134, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-134 record remains the picking reference.

For trade item 6203-134, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-134 on the packing instruction.

Frequently Asked Questions

How should item 6203-134 and blower number C11-1343 be verified?

Match 6203-134 to the complete C11-1343 marking, then compare the 6203-134 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-134 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-134; confirm steering position, climate-control specification and the original 6203-134 geometry before approval.

What circuit checks are useful when 6203-134 does not operate?

For 6203-134, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-134 motor again.

Which details should accompany a wholesale request for 6203-134?

Provide item 6203-134, OE C11-1343, the stated application, quantity and destination; add 6203-134 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-134?

Clear debris from the air inlet, check that the 6203-134 wheel turns freely, seat the 6203-134 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-134: Send C11-1343, the 6203-134 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.