C10061B10A Blower Motor for MAZDA

C10061B10A Automotive Blower Motor Overview

This product entry documents the C10061B10A blower unit with practical identification and C10061B10A installation checkpoints.

For catalogue item 6206-031, Stable wheel rotation helps distribute air without relying on vehicle speed, making the C10061B10A blower important at idle and in traffic. Use 6206-031 when comparing this C10061B10A airflow configuration.

OE Reference and Application

The primary catalogue number is C10061B10A . The recorded application is MAZDA. For 6206-031, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6206-031 with the approved OE reference.

HVAC Interface and C10061B10A installation

During work on 6206-031, After C10061B10A installation, operate low through high speed and confirm C10061B10A airflow reaches the selected vents without abnormal vibration. Recheck 6206-031 before the lower trim is closed.

For item 6206-031, confirm that the C10061B10A centrifugal wheel clears its housing and that the 6206-031 connector lock engages without force. After seating 6206-031, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-031.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: C10061B10A

Cross-reference numbers: 8940000202 / GE4T61B10A

Vehicle brand: MAZDA

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

C10061B10A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6206-031, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6206-031 record remains the picking reference.

For trade item 6206-031, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6206-031 on the packing instruction.

Frequently Asked Questions

How should item 6206-031 and blower number C10061B10A be verified?

Match 6206-031 to the complete C10061B10A marking, then compare the 6206-031 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.

Can 6206-031 have more than one vehicle-side blower configuration?

Yes. MAZDA production changes can affect 6206-031; confirm steering position, climate-control specification and the original 6206-031 geometry before approval.

What circuit checks are useful when 6206-031 does not operate?

For 6206-031, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-031 motor again.

Which details should accompany a wholesale request for 6206-031?

Provide item 6206-031, OE C10061B10A, the stated application, quantity and destination; add 6206-031 carton or private-label requirements separately.

How can noise be avoided after fitting 6206-031?

Clear debris from the air inlet, check that the 6206-031 wheel turns freely, seat the 6206-031 flange evenly and keep wiring away from the impeller.

Request a quote for 6206-031: Send C10061B10A, the 6206-031 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country