C00074203 Blower Motor for MAXUS G10

C00074203 Automotive Blower Motor Overview

Reference C00074203 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6255-001, the C00074203 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6255-001 when comparing this C00074203 airflow configuration.

OE Reference and Application

The primary catalogue number is C00074203 . The recorded application is MAXUS G10. For 6255-001, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6255-001 with the approved OE reference.

HVAC Interface and C00074203 installation

During work on 6255-001, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6255-001 before the lower trim is closed.

For item 6255-001, confirm that the C00074203 centrifugal wheel clears its housing and that the 6255-001 connector lock engages without force. After seating 6255-001, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6255-001.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: C00074203

Cross-reference numbers: C00074203

Vehicle brand: MAXUS

Vehicle model: G10

Model year: Confirm by OE reference

C00074203 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6255-001, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6255-001 record remains the picking reference.

For trade item 6255-001, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6255-001 on the packing instruction.

Frequently Asked Questions

How should item 6255-001 and blower number C00074203 be verified?

Match 6255-001 to the complete C00074203 marking, then compare the 6255-001 plug, terminal count, mounting flange and wheel dimensions with the removed MAXUS unit.

Can 6255-001 have more than one vehicle-side blower configuration?

Yes. MAXUS production changes can affect 6255-001; confirm steering position, climate-control specification and the original 6255-001 geometry before approval.

What circuit checks are useful when 6255-001 does not operate?

For 6255-001, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6255-001 motor again.

Which details should accompany a wholesale request for 6255-001?

Provide item 6255-001, OE C00074203, the stated application, quantity and destination; add 6255-001 carton or private-label requirements separately.

How can noise be avoided after fitting 6255-001?

Clear debris from the air inlet, check that the 6255-001 wheel turns freely, seat the 6255-001 flange evenly and keep wiring away from the impeller.

Request a quote for 6255-001: Send C00074203, the 6255-001 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country