BS-60-010 Blower Motor for FORD

BS-60-010 Automotive Blower Motor Overview

This listing links BS-60-010 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6203-029, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-029 when comparing this BS-60-010 airflow configuration.

OE Reference and Application

The primary catalogue number is BS-60-010 . The recorded application is FORD. For 6203-029, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-029 with the approved OE reference.

HVAC Interface and BS-60-010 installation

During work on 6203-029, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after BS-60-010 installation. Recheck 6203-029 before the lower trim is closed.

For item 6203-029, confirm that the BS-60-010 centrifugal wheel clears its housing and that the 6203-029 connector lock engages without force. After seating 6203-029, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-029.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: BS-60-010

Cross-reference numbers: CXA-2159

Vehicle brand: FORD

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

BS-60-010 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-029, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-029 record remains the picking reference.

For trade item 6203-029, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-029 on the packing instruction.

Frequently Asked Questions

How should item 6203-029 and blower number BS-60-010 be verified?

Match 6203-029 to the complete BS-60-010 marking, then compare the 6203-029 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-029 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-029; confirm steering position, climate-control specification and the original 6203-029 geometry before approval.

What circuit checks are useful when 6203-029 does not operate?

For 6203-029, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-029 motor again.

Which details should accompany a wholesale request for 6203-029?

Provide item 6203-029, OE BS-60-010, the stated application, quantity and destination; add 6203-029 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-029?

Clear debris from the air inlet, check that the 6203-029 wheel turns freely, seat the 6203-029 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-029: Send BS-60-010, the 6203-029 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country