AutoParts
BA15340620 Blower Motor for NISSAN Navara
Blower Motor — BA15340620. NISSAN Navara. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- BA15340620
- Supplier SKU
- 6205-046
- Vehicle application
- NISSAN Navara
- Part type
- Blower Motor
Key references
- OE reference
- BA15340620
- Supplier SKU
- 6205-046
- Vehicle application
- NISSAN Navara
- Part type
- Blower Motor
Product specifications
| OE reference | BA15340620 |
|---|---|
| Supplier SKU | 6205-046 |
| Vehicle application | NISSAN Navara |
| Vehicle make | NISSAN |
| Vehicle model | Navara |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | BA15340620 |
Product details
BA15340620 Automotive Blower Motor Overview
The BA15340620 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-046, When the climate-control circuit commands BA15340620 airflow, the electric motor rotates the BA15340620 fan wheel inside the HVAC housing. Use 6205-046 when comparing this BA15340620 airflow configuration.
OE Reference and Application
The primary catalogue number is BA15340620 . The recorded application is NISSAN Navara. For 6205-046, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-046 with the approved OE reference.
HVAC Interface and BA15340620 installation
During work on 6205-046, If BA15340620 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the BA15340620 motor is the only cause. Recheck 6205-046 before the lower trim is closed.
For item 6205-046, confirm that the BA15340620 centrifugal wheel clears its housing and that the 6205-046 connector lock engages without force. After seating 6205-046, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-046.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: BA15340620
Cross-reference numbers: BA15340620
Vehicle brand: NISSAN
Vehicle model: Navara
Model year: Confirm by OE reference
BA15340620 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6205-046, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-046 record remains the picking reference.
For trade item 6205-046, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6205-046 on the packing instruction.
Frequently Asked Questions
How should item 6205-046 and blower number BA15340620 be verified?
Match 6205-046 to the complete BA15340620 marking, then compare the 6205-046 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-046 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-046; confirm steering position, climate-control specification and the original 6205-046 geometry before approval.
What circuit checks are useful when 6205-046 does not operate?
For 6205-046, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-046 motor again.
Which details should accompany a wholesale request for 6205-046?
Provide item 6205-046, OE BA15340620, the stated application, quantity and destination; add 6205-046 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-046?
Clear debris from the air inlet, check that the 6205-046 wheel turns freely, seat the 6205-046 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-046: Send BA15340620, the 6205-046 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.