AA116360-0531 Blower Motor for FIAT

AA116360-0531 Automotive Blower Motor Overview

This listing links AA116360-0531 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6219-023, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6219-023 when comparing this AA116360-0531 airflow configuration.

OE Reference and Application

The primary catalogue number is AA116360-0531 . The recorded application is FIAT. For 6219-023, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6219-023 with the approved OE reference.

HVAC Interface and AA116360-0531 installation

During work on 6219-023, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after AA116360-0531 installation. Recheck 6219-023 before the lower trim is closed.

For item 6219-023, confirm that the AA116360-0531 centrifugal wheel clears its housing and that the 6219-023 connector lock engages without force. After seating 6219-023, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-023.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: AA116360-0531

Cross-reference numbers: 68093422AB / 51836362 / 77366109 / 548628 / 98619594 / 68093422AA / 51836367 / 52460703 / 77366203 / 77366253 / 77366916 / 77368879 / 15-80213

Vehicle brand: FIAT

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

AA116360-0531 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6219-023, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6219-023 record remains the picking reference.

For trade item 6219-023, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6219-023 on the packing instruction.

Frequently Asked Questions

How should item 6219-023 and blower number AA116360-0531 be verified?

Match 6219-023 to the complete AA116360-0531 marking, then compare the 6219-023 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.

Can 6219-023 have more than one vehicle-side blower configuration?

Yes. FIAT production changes can affect 6219-023; confirm steering position, climate-control specification and the original 6219-023 geometry before approval.

What circuit checks are useful when 6219-023 does not operate?

For 6219-023, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-023 motor again.

Which details should accompany a wholesale request for 6219-023?

Provide item 6219-023, OE AA116360-0531, the stated application, quantity and destination; add 6219-023 carton or private-label requirements separately.

How can noise be avoided after fitting 6219-023?

Clear debris from the air inlet, check that the 6219-023 wheel turns freely, seat the 6219-023 flange evenly and keep wiring away from the impeller.

Request a quote for 6219-023: Send AA116360-0531, the 6219-023 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country