A2228202214 Blower Motor for MERCEDES-BENZ S-Class

A2228202214 Automotive Blower Motor Overview

Reference A2228202214 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6233-055, the A2228202214 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6233-055 when comparing this A2228202214 airflow configuration.

OE Reference and Application

The primary catalogue number is A2228202214 . The recorded application is MERCEDES-BENZ S-Class. For 6233-055, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6233-055 with the approved OE reference.

HVAC Interface and A2228202214 installation

During work on 6233-055, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6233-055 before the lower trim is closed.

For item 6233-055, confirm that the A2228202214 centrifugal wheel clears its housing and that the 6233-055 connector lock engages without force. After seating 6233-055, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-055.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: A2228202214

Cross-reference numbers: 2228202214 / 87461 / KM9784 / 34281 / 128189N

Vehicle brand: MERCEDES-BENZ

Vehicle model: S-Class

Model year: Confirm by OE reference

A2228202214 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6233-055, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6233-055 record remains the picking reference.

For trade item 6233-055, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6233-055 on the packing instruction.

Frequently Asked Questions

How should item 6233-055 and blower number A2228202214 be verified?

Match 6233-055 to the complete A2228202214 marking, then compare the 6233-055 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.

Can 6233-055 have more than one vehicle-side blower configuration?

Yes. MERCEDES-BENZ production changes can affect 6233-055; confirm steering position, climate-control specification and the original 6233-055 geometry before approval.

What circuit checks are useful when 6233-055 does not operate?

For 6233-055, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-055 motor again.

Which details should accompany a wholesale request for 6233-055?

Provide item 6233-055, OE A2228202214, the stated application, quantity and destination; add 6233-055 carton or private-label requirements separately.

How can noise be avoided after fitting 6233-055?

Clear debris from the air inlet, check that the 6233-055 wheel turns freely, seat the 6233-055 flange evenly and keep wiring away from the impeller.

Request a quote for 6233-055: Send A2228202214, the 6233-055 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country