A1669066100 Blower Motor for MERCEDES-BENZ M-Class 2013-2016

A1669066100 Automotive Blower Motor Overview

The A1669066100 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6232-007, When the climate-control circuit commands A1669066100 airflow, the electric motor rotates the A1669066100 fan wheel inside the HVAC housing. Use 6232-007 when comparing this A1669066100 airflow configuration.

OE Reference and Application

The primary catalogue number is A1669066100 . The recorded application is MERCEDES-BENZ M-Class 2013-2016. For 6232-007, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6232-007 with the approved OE reference.

HVAC Interface and A1669066100 installation

During work on 6232-007, If A1669066100 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the A1669066100 motor is the only cause. Recheck 6232-007 before the lower trim is closed.

For item 6232-007, confirm that the A1669066100 centrifugal wheel clears its housing and that the 6232-007 connector lock engages without force. After seating 6232-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6232-007.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: A1669066100

Cross-reference numbers: 351149714 / 70815756NA / 1669066100 / LFH15166 / 74966 / 722903 / 34237 / 8EW351149714 / AB231000S / PM5175

Vehicle brand: MERCEDES-BENZ

Vehicle model: M-Class

Model year: 2013-2016

A1669066100 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6232-007, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6232-007 record remains the picking reference.

For trade item 6232-007, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6232-007 on the packing instruction.

Frequently Asked Questions

How should item 6232-007 and blower number A1669066100 be verified?

Match 6232-007 to the complete A1669066100 marking, then compare the 6232-007 plug, terminal count, mounting flange and wheel dimensions with the removed MERCEDES-BENZ unit.

Can 6232-007 have more than one vehicle-side blower configuration?

Yes. MERCEDES-BENZ production changes can affect 6232-007; confirm steering position, climate-control specification and the original 6232-007 geometry before approval.

What circuit checks are useful when 6232-007 does not operate?

For 6232-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6232-007 motor again.

Which details should accompany a wholesale request for 6232-007?

Provide item 6232-007, OE A1669066100, the stated application, quantity and destination; add 6232-007 carton or private-label requirements separately.

How can noise be avoided after fitting 6232-007?

Clear debris from the air inlet, check that the 6232-007 wheel turns freely, seat the 6232-007 flange evenly and keep wiring away from the impeller.

Request a quote for 6232-007: Send A1669066100, the 6232-007 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country