AutoParts

97945-4H000 Blower Motor for HYUNDAI Grand Starex

Blower Motor — 97945-4H000. HYUNDAI Grand Starex. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
97945-4H000
Supplier SKU
6202-020
Vehicle application
HYUNDAI Grand Starex
Part type
Blower Motor
Send an inquiry

Key references

OE reference
97945-4H000
Supplier SKU
6202-020
Vehicle application
HYUNDAI Grand Starex
Part type
Blower Motor

Product specifications

OE reference97945-4H000
Supplier SKU6202-020
Vehicle applicationHYUNDAI Grand Starex
Vehicle makeHYUNDAI
Vehicle modelGrand Starex
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers97946-4H000 / 97235-3K000

Product details

97945-4H000 Automotive Blower Motor Overview

The 97945-4H000 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6202-020, When the climate-control circuit commands 97945-4H000 airflow, the electric motor rotates the 97945-4H000 fan wheel inside the HVAC housing. Use 6202-020 when comparing this 97945-4H000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97945-4H000 . The recorded application is HYUNDAI Grand Starex. For 6202-020, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6202-020 with the approved OE reference.

HVAC Interface and 97945-4H000 installation

During work on 6202-020, If 97945-4H000 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 97945-4H000 motor is the only cause. Recheck 6202-020 before the lower trim is closed.

For item 6202-020, confirm that the 97945-4H000 centrifugal wheel clears its housing and that the 6202-020 connector lock engages without force. After seating 6202-020, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-020.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97945-4H000

Cross-reference numbers: 97946-4H000 / 97235-3K000

Vehicle brand: HYUNDAI

Vehicle model: Grand Starex

Model year: Confirm by OE reference

97945-4H000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6202-020, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6202-020 record remains the picking reference.

For trade item 6202-020, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6202-020 on the packing instruction.

Frequently Asked Questions

How should item 6202-020 and blower number 97945-4H000 be verified?

Match 6202-020 to the complete 97945-4H000 marking, then compare the 6202-020 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6202-020 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6202-020; confirm steering position, climate-control specification and the original 6202-020 geometry before approval.

What circuit checks are useful when 6202-020 does not operate?

For 6202-020, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-020 motor again.

Which details should accompany a wholesale request for 6202-020?

Provide item 6202-020, OE 97945-4H000, the stated application, quantity and destination; add 6202-020 carton or private-label requirements separately.

How can noise be avoided after fitting 6202-020?

Clear debris from the air inlet, check that the 6202-020 wheel turns freely, seat the 6202-020 flange evenly and keep wiring away from the impeller.

Request a quote for 6202-020: Send 97945-4H000, the 6202-020 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.