AutoParts

97113L1100 Blower Motor for HYUNDAI Sonata

Blower Motor — 97113L1100. HYUNDAI Sonata. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
97113L1100
Supplier SKU
6201-040
Vehicle application
HYUNDAI Sonata
Part type
Blower Motor
Send an inquiry

Key references

OE reference
97113L1100
Supplier SKU
6201-040
Vehicle application
HYUNDAI Sonata
Part type
Blower Motor

Product specifications

OE reference97113L1100
Supplier SKU6201-040
Vehicle applicationHYUNDAI Sonata
Vehicle makeHYUNDAI
Vehicle modelSonata
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers97113L1100

Product details

97113L1100 Automotive Blower Motor Overview

This listing links 97113L1100 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6201-040, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6201-040 when comparing this 97113L1100 airflow configuration.

OE Reference and Application

The primary catalogue number is 97113L1100 . The recorded application is HYUNDAI Sonata. For 6201-040, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6201-040 with the approved OE reference.

HVAC Interface and 97113L1100 installation

During work on 6201-040, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 97113L1100 installation. Recheck 6201-040 before the lower trim is closed.

For item 6201-040, confirm that the 97113L1100 centrifugal wheel clears its housing and that the 6201-040 connector lock engages without force. After seating 6201-040, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-040.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97113L1100

Cross-reference numbers: 97113L1100

Vehicle brand: HYUNDAI

Vehicle model: Sonata

Model year: Confirm by OE reference

97113L1100 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-040, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-040 record remains the picking reference.

For trade item 6201-040, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6201-040 on the packing instruction.

Frequently Asked Questions

How should item 6201-040 and blower number 97113L1100 be verified?

Match 6201-040 to the complete 97113L1100 marking, then compare the 6201-040 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6201-040 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6201-040; confirm steering position, climate-control specification and the original 6201-040 geometry before approval.

What circuit checks are useful when 6201-040 does not operate?

For 6201-040, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-040 motor again.

Which details should accompany a wholesale request for 6201-040?

Provide item 6201-040, OE 97113L1100, the stated application, quantity and destination; add 6201-040 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-040?

Clear debris from the air inlet, check that the 6201-040 wheel turns freely, seat the 6201-040 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-040: Send 97113L1100, the 6201-040 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.