AutoParts

97113CV000 Blower Motor for KIA EV6

Blower Motor — 97113CV000. KIA EV6. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
97113CV000
Supplier SKU
6201-057
Vehicle application
KIA EV6
Part type
Blower Motor
Send an inquiry

Key references

OE reference
97113CV000
Supplier SKU
6201-057
Vehicle application
KIA EV6
Part type
Blower Motor

Product specifications

OE reference97113CV000
Supplier SKU6201-057
Vehicle applicationKIA EV6
Vehicle makeKIA
Vehicle modelEV6
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers97113CV000

Product details

97113CV000 Automotive Blower Motor Overview

This listing links 97113CV000 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6201-057, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6201-057 when comparing this 97113CV000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97113CV000 . The recorded application is KIA EV6. For 6201-057, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6201-057 with the approved OE reference.

HVAC Interface and 97113CV000 installation

During work on 6201-057, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 97113CV000 installation. Recheck 6201-057 before the lower trim is closed.

For item 6201-057, confirm that the 97113CV000 centrifugal wheel clears its housing and that the 6201-057 connector lock engages without force. After seating 6201-057, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-057.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97113CV000

Cross-reference numbers: 97113CV000

Vehicle brand: KIA

Vehicle model: EV6

Model year: Confirm by OE reference

97113CV000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-057, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-057 record remains the picking reference.

For trade item 6201-057, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6201-057 on the packing instruction.

Frequently Asked Questions

How should item 6201-057 and blower number 97113CV000 be verified?

Match 6201-057 to the complete 97113CV000 marking, then compare the 6201-057 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.

Can 6201-057 have more than one vehicle-side blower configuration?

Yes. KIA production changes can affect 6201-057; confirm steering position, climate-control specification and the original 6201-057 geometry before approval.

What circuit checks are useful when 6201-057 does not operate?

For 6201-057, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-057 motor again.

Which details should accompany a wholesale request for 6201-057?

Provide item 6201-057, OE 97113CV000, the stated application, quantity and destination; add 6201-057 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-057?

Clear debris from the air inlet, check that the 6201-057 wheel turns freely, seat the 6201-057 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-057: Send 97113CV000, the 6201-057 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.