97113-N8000 Blower Motor for HYUNDAI Elantra

97113-N8000 Automotive Blower Motor Overview

Reference 97113-N8000 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6202-046, the 97113-N8000 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6202-046 when comparing this 97113-N8000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97113-N8000 . The recorded application is HYUNDAI Elantra. For 6202-046, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6202-046 with the approved OE reference.

HVAC Interface and 97113-N8000 installation

During work on 6202-046, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6202-046 before the lower trim is closed.

For item 6202-046, confirm that the 97113-N8000 centrifugal wheel clears its housing and that the 6202-046 connector lock engages without force. After seating 6202-046, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-046.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97113-N8000

Cross-reference numbers: 97113-AA100

Vehicle brand: HYUNDAI

Vehicle model: Elantra

Model year: Confirm by OE reference

97113-N8000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6202-046, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6202-046 record remains the picking reference.

For trade item 6202-046, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6202-046 on the packing instruction.

Frequently Asked Questions

How should item 6202-046 and blower number 97113-N8000 be verified?

Match 6202-046 to the complete 97113-N8000 marking, then compare the 6202-046 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6202-046 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6202-046; confirm steering position, climate-control specification and the original 6202-046 geometry before approval.

What circuit checks are useful when 6202-046 does not operate?

For 6202-046, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-046 motor again.

Which details should accompany a wholesale request for 6202-046?

Provide item 6202-046, OE 97113-N8000, the stated application, quantity and destination; add 6202-046 carton or private-label requirements separately.

How can noise be avoided after fitting 6202-046?

Clear debris from the air inlet, check that the 6202-046 wheel turns freely, seat the 6202-046 flange evenly and keep wiring away from the impeller.

Request a quote for 6202-046: Send 97113-N8000, the 6202-046 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country