97113-J7000 Blower Motor for HYUNDAI Lafesta

97113-J7000 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 97113-J7000 to support OE-number comparison before purchase.

For catalogue item 6202-043, Cabin 97113-J7000 airflow depends on the 97113-J7000 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6202-043 when comparing this 97113-J7000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97113-J7000 . The recorded application is HYUNDAI Lafesta. For 6202-043, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6202-043 with the approved OE reference.

HVAC Interface and 97113-J7000 installation

During work on 6202-043, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6202-043 before the lower trim is closed.

For item 6202-043, confirm that the 97113-J7000 centrifugal wheel clears its housing and that the 6202-043 connector lock engages without force. After seating 6202-043, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-043.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97113-J7000

Cross-reference numbers: 97113-J7000

Vehicle brand: HYUNDAI

Vehicle model: Lafesta

Model year: Confirm by OE reference

97113-J7000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6202-043, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6202-043 record remains the picking reference.

For trade item 6202-043, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6202-043 on the packing instruction.

Frequently Asked Questions

How should item 6202-043 and blower number 97113-J7000 be verified?

Match 6202-043 to the complete 97113-J7000 marking, then compare the 6202-043 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6202-043 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6202-043; confirm steering position, climate-control specification and the original 6202-043 geometry before approval.

What circuit checks are useful when 6202-043 does not operate?

For 6202-043, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-043 motor again.

Which details should accompany a wholesale request for 6202-043?

Provide item 6202-043, OE 97113-J7000, the stated application, quantity and destination; add 6202-043 carton or private-label requirements separately.

How can noise be avoided after fitting 6202-043?

Clear debris from the air inlet, check that the 6202-043 wheel turns freely, seat the 6202-043 flange evenly and keep wiring away from the impeller.

Request a quote for 6202-043: Send 97113-J7000, the 6202-043 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country