97113-H8000 Blower Motor for KIA Creta 2018-2019

97113-H8000 Automotive Blower Motor Overview

Reference 97113-H8000 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6201-017, the 97113-H8000 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6201-017 when comparing this 97113-H8000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97113-H8000 . The recorded application is KIA Creta 2018-2019. For 6201-017, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6201-017 with the approved OE reference.

HVAC Interface and 97113-H8000 installation

During work on 6201-017, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6201-017 before the lower trim is closed.

For item 6201-017, confirm that the 97113-H8000 centrifugal wheel clears its housing and that the 6201-017 connector lock engages without force. After seating 6201-017, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-017.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97113-H8000

Cross-reference numbers: 97113-M0000 / 97113-K8000 / 97113-H7000 / F0053B2570 / 4787279 / F00S3B2570 / 97113H9000

Vehicle brand: KIA

Vehicle model: Creta

Model year: 2018-2019

97113-H8000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-017, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-017 record remains the picking reference.

For trade item 6201-017, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6201-017 on the packing instruction.

Frequently Asked Questions

How should item 6201-017 and blower number 97113-H8000 be verified?

Match 6201-017 to the complete 97113-H8000 marking, then compare the 6201-017 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.

Can 6201-017 have more than one vehicle-side blower configuration?

Yes. KIA production changes can affect 6201-017; confirm steering position, climate-control specification and the original 6201-017 geometry before approval.

What circuit checks are useful when 6201-017 does not operate?

For 6201-017, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-017 motor again.

Which details should accompany a wholesale request for 6201-017?

Provide item 6201-017, OE 97113-H8000, the stated application, quantity and destination; add 6201-017 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-017?

Clear debris from the air inlet, check that the 6201-017 wheel turns freely, seat the 6201-017 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-017: Send 97113-H8000, the 6201-017 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country