97113-1M000 Blower Motor for KIA Forte

97113-1M000 Automotive Blower Motor Overview

The 97113-1M000 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6201-006, When the climate-control circuit commands 97113-1M000 airflow, the electric motor rotates the 97113-1M000 fan wheel inside the HVAC housing. Use 6201-006 when comparing this 97113-1M000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97113-1M000 . The recorded application is KIA Forte. For 6201-006, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6201-006 with the approved OE reference.

HVAC Interface and 97113-1M000 installation

During work on 6201-006, If 97113-1M000 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 97113-1M000 motor is the only cause. Recheck 6201-006 before the lower trim is closed.

For item 6201-006, confirm that the 97113-1M000 centrifugal wheel clears its housing and that the 6201-006 connector lock engages without force. After seating 6201-006, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-006.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97113-1M000

Cross-reference numbers: 97111-1J900 / 97113-1M001 / RC530064 / B30053-1200 / 700261 / 615-50225 / 971131X000

Vehicle brand: KIA

Vehicle model: Forte

Model year: Confirm by OE reference

97113-1M000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-006, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-006 record remains the picking reference.

For trade item 6201-006, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6201-006 on the packing instruction.

Frequently Asked Questions

How should item 6201-006 and blower number 97113-1M000 be verified?

Match 6201-006 to the complete 97113-1M000 marking, then compare the 6201-006 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.

Can 6201-006 have more than one vehicle-side blower configuration?

Yes. KIA production changes can affect 6201-006; confirm steering position, climate-control specification and the original 6201-006 geometry before approval.

What circuit checks are useful when 6201-006 does not operate?

For 6201-006, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-006 motor again.

Which details should accompany a wholesale request for 6201-006?

Provide item 6201-006, OE 97113-1M000, the stated application, quantity and destination; add 6201-006 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-006?

Clear debris from the air inlet, check that the 6201-006 wheel turns freely, seat the 6201-006 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-006: Send 97113-1M000, the 6201-006 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country