97111-G6000 Blower Motor for KIA Picanto 2017-2021

97111-G6000 Automotive Blower Motor Overview

The 97111-G6000 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6201-020, When the climate-control circuit commands 97111-G6000 airflow, the electric motor rotates the 97111-G6000 fan wheel inside the HVAC housing. Use 6201-020 when comparing this 97111-G6000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97111-G6000 . The recorded application is KIA Picanto 2017-2021. For 6201-020, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6201-020 with the approved OE reference.

HVAC Interface and 97111-G6000 installation

During work on 6201-020, If 97111-G6000 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 97111-G6000 motor is the only cause. Recheck 6201-020 before the lower trim is closed.

For item 6201-020, confirm that the 97111-G6000 centrifugal wheel clears its housing and that the 6201-020 connector lock engages without force. After seating 6201-020, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-020.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97111-G6000

Cross-reference numbers: F00S3B2526

Vehicle brand: KIA

Vehicle model: Picanto

Model year: 2017-2021

97111-G6000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6201-020, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-020 record remains the picking reference.

For trade item 6201-020, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6201-020 on the packing instruction.

Frequently Asked Questions

How should item 6201-020 and blower number 97111-G6000 be verified?

Match 6201-020 to the complete 97111-G6000 marking, then compare the 6201-020 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.

Can 6201-020 have more than one vehicle-side blower configuration?

Yes. KIA production changes can affect 6201-020; confirm steering position, climate-control specification and the original 6201-020 geometry before approval.

What circuit checks are useful when 6201-020 does not operate?

For 6201-020, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-020 motor again.

Which details should accompany a wholesale request for 6201-020?

Provide item 6201-020, OE 97111-G6000, the stated application, quantity and destination; add 6201-020 carton or private-label requirements separately.

How can noise be avoided after fitting 6201-020?

Clear debris from the air inlet, check that the 6201-020 wheel turns freely, seat the 6201-020 flange evenly and keep wiring away from the impeller.

Request a quote for 6201-020: Send 97111-G6000, the 6201-020 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country