97111-1J000 Blower Motor for HYUNDAI i20 2014

97111-1J000 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 97111-1J000 together with the 97111-1J000 product images and vehicle data on this page.

For catalogue item 6202-045, the 97111-1J000 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6202-045 when comparing this 97111-1J000 airflow configuration.

OE Reference and Application

The primary catalogue number is 97111-1J000 . The recorded application is HYUNDAI i20 2014. For 6202-045, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6202-045 with the approved OE reference.

HVAC Interface and 97111-1J000 installation

During work on 6202-045, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6202-045 before the lower trim is closed.

For item 6202-045, confirm that the 97111-1J000 centrifugal wheel clears its housing and that the 6202-045 connector lock engages without force. After seating 6202-045, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-045.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 97111-1J000

Cross-reference numbers: F00S330056 / 4997168 / 5018628

Vehicle brand: HYUNDAI

Vehicle model: i20

Model year: 2014

97111-1J000 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6202-045, Packing preparation accounts for the 97111-1J000 motor weight and wheel shape to reduce movement inside the carton. The 6202-045 record remains the picking reference.

For trade item 6202-045, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6202-045 on the packing instruction.

Frequently Asked Questions

How should item 6202-045 and blower number 97111-1J000 be verified?

Match 6202-045 to the complete 97111-1J000 marking, then compare the 6202-045 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.

Can 6202-045 have more than one vehicle-side blower configuration?

Yes. HYUNDAI production changes can affect 6202-045; confirm steering position, climate-control specification and the original 6202-045 geometry before approval.

What circuit checks are useful when 6202-045 does not operate?

For 6202-045, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-045 motor again.

Which details should accompany a wholesale request for 6202-045?

Provide item 6202-045, OE 97111-1J000, the stated application, quantity and destination; add 6202-045 carton or private-label requirements separately.

How can noise be avoided after fitting 6202-045?

Clear debris from the air inlet, check that the 6202-045 wheel turns freely, seat the 6202-045 flange evenly and keep wiring away from the impeller.

Request a quote for 6202-045: Send 97111-1J000, the 6202-045 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country