96554426 Blower Motor for NISSAN

96554426 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 96554426 together with the 96554426 product images and vehicle data on this page.

For catalogue item 6205-126, the 96554426 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-126 when comparing this 96554426 airflow configuration.

OE Reference and Application

The primary catalogue number is 96554426 . The recorded application is NISSAN. For 6205-126, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-126 with the approved OE reference.

HVAC Interface and 96554426 installation

During work on 6205-126, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-126 before the lower trim is closed.

For item 6205-126, confirm that the 96554426 centrifugal wheel clears its housing and that the 6205-126 connector lock engages without force. After seating 6205-126, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-126.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 96554426

Cross-reference numbers: 96554426

Vehicle brand: NISSAN

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

96554426 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6205-126, Packing preparation accounts for the 96554426 motor weight and wheel shape to reduce movement inside the carton. The 6205-126 record remains the picking reference.

For trade item 6205-126, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6205-126 on the packing instruction.

Frequently Asked Questions

How should item 6205-126 and blower number 96554426 be verified?

Match 6205-126 to the complete 96554426 marking, then compare the 6205-126 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.

Can 6205-126 have more than one vehicle-side blower configuration?

Yes. NISSAN production changes can affect 6205-126; confirm steering position, climate-control specification and the original 6205-126 geometry before approval.

What circuit checks are useful when 6205-126 does not operate?

For 6205-126, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-126 motor again.

Which details should accompany a wholesale request for 6205-126?

Provide item 6205-126, OE 96554426, the stated application, quantity and destination; add 6205-126 carton or private-label requirements separately.

How can noise be avoided after fitting 6205-126?

Clear debris from the air inlet, check that the 6205-126 wheel turns freely, seat the 6205-126 flange evenly and keep wiring away from the impeller.

Request a quote for 6205-126: Send 96554426, the 6205-126 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country