92406-F2000 Rear Bumper Light for HYUNDAI Elantra 2016 Right

92406-F2000 Rear Bumper Light Overview

This product is listed for HYUNDAI Elantra 2016 at the right rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.

Production date and regional bumper specification should be reviewed when several near-identical versions are available.

At the workshop selection stage for Elantra, record the approved side and vehicle application for repeat-order identification before the packaging and carton marking are finalized.

Physical Fitment Evidence

Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.

Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.

At the right rear-bumper position, confirm that the cable exit, where fitted, clears the bumper reinforcement before inner liners make the rear attachment points difficult to inspect.

When reviewing the 2016 vehicle, confirm that any connector seal remains square when the housing is fully seated so the visible gap remains even after every retaining point is engaged.

Surface, Seal and Electrical Interface

If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.

Protect the exposed face from tools and fasteners while the bumper liner is open for access.

For the HYUNDAI Elantra application, use the opposite-side component only as an alignment reference, not as an interchange part so the lens and housing are supported without distortion.

For this Elantra body configuration, compare the outer lens edge with the moulded bumper recess so a passive reflector is not confused with an illuminated assembly.

Bumper Assembly Check

After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.

After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.

Before approving the Elantra part for packing, inspect the lower valance and nearby exhaust trim for adequate operating clearance to verify that the photographed configuration matches the vehicle in the workshop.

Before fitting the right unit, check the rear housing projection against the space behind the bumper skin to avoid contact with wiring, body edges or hot exhaust components.

Automotive Lighting Product Specifications

Product type: Rear Bumper Light

Primary OE reference: 92406-F2000

Cross-reference numbers: 92406-F2000

Internal item code: HY04004-008

Vehicle brand: HYUNDAI

Vehicle model: Elantra

Model year: 2016

Installation position: Rear bumper / reflector opening

Side / orientation: Right

Configuration: Match the photographed reflector or powered-lamp version

Wholesale Supply and Protective Packing

Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.

Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.

While the HYUNDAI bumper opening is accessible, compare the bumper corner radius with the product face from more than one viewing angle to keep the optical face level with the surrounding painted surface.

During comparison of the HYUNDAI rear component, align each locating tab with the matching slot before applying hand pressure before any modification is made to the bumper or replacement part.

Frequently Asked Questions

Why can the same model year use another version?

Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.

Can appearance alone confirm compatibility?

No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.

What should be tested after fitting?

Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.

Is this component illuminated or reflector-only?

Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.

What details help with a wholesale quote?

Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.

Request a Product-Specific Quote

Repeat buyers can reference the vehicle application and side from their previous approved sample.

Bumper interface: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.

Product function: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.

Selection context: A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.

Post-fit check: For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.

Trade-order details: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.

Packing reference: Projecting tabs should be supported with shaped material instead of carrying the weight of other products.