92303-2B120 Fender Light for HYUNDAI Elantra 2004 Left

92303-2B120 Fender Light Overview

This vehicle-specific fender light is listed for HYUNDAI Elantra 2004 at the left side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.

Treat side designation as a primary selection field whenever the lens has an asymmetric outer contour. Depending on vehicle specification, the assembly may operate as a side repeater, marker lamp or combined signal unit.

Fitment Evidence for the Side Marker

Check whether the original lens wraps toward the door or bumper and match that directional profile.

For HYUNDAI Elantra 2004, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.

Optical Surface and Connector Review

A properly matched unit combines the required signalling function with a flush interface to the surrounding panel.

Confirm the bulb base or LED module matches the original circuit before closing the rear access area. Lens colour and reflector texture should also be compared under neutral lighting.

Workshop Installation Guidance

Complete installation by checking lens orientation, panel gap and repeater operation in one inspection.

Check the visible surface under neutral light and confirm the rear body has not been distorted. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.

Automotive Component Specifications

Product type: Fender Light / Side Marker Lamp

Primary OE reference: 92303-2B120

Cross-reference numbers: 92303-2B120

Internal item code: HY04005-017

Vehicle brand: HYUNDAI

Vehicle model: Elantra

Model year: 2004

Installation position: Front fender / side marker opening

Side / orientation: Left

Wholesale Supply and Packing

Quantity planning is more accurate when the enquiry distinguishes repair demand from left-right kit supply. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.

Frequently Asked Questions

How should 92303-2B120 compatibility be confirmed?

Match the OE reference, HYUNDAI Elantra production year, installation side, connector and hidden mounting geometry.

Can left and right fender lamps be exchanged?

Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.

What should be checked before installation?

Match the narrow and wide ends of the lens to the original fender orientation before trial fitting. Check polarity and connector engagement on powered versions without modifying the factory harness.

What test is recommended after fitting?

Seat the locating peg before the spring clip and watch the painted edge for any sign of interference.

Which details are needed for a wholesale quote?

Send a photograph of the removed lamp when several market versions share a similar outline.

Need a quotation? Contact AutoParts with the OE reference, vehicle details, side, quantity and destination.

Physical comparison: Inspect the fender cut-out from behind, then match the lamp shoulder and retention groove to that opening.

Lighting function: The assembly is designed around the vehicle fender profile, not as a universal surface-mounted light.

Electrical check: Make sure the cable grommet faces away from water traps and remains fully seated after the lamp is clipped in.

Installation guidance: Support the rear of the opening while seating the clip so pressure is not concentrated on the lens.

Selection context: The OE reference should be checked together with body position and electrical configuration.

Product handling: Place the unit on clean protective material with the connector and mounting legs free from load.

Wholesale enquiry: Sample approval should record the fender position before volume production and export packing are released.