92303-1Y000 Fender Light for KIA Picanto JA 2017 Left

92303-1Y000 Fender Light Overview

This vehicle-specific fender light is listed for KIA Picanto JA 2017 at the left side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.

Facelift and regional specifications may change the fender opening even when the vehicle name is unchanged. The marker supplies a defined side-lighting cue and must retain the specified lens colour and orientation.

Vehicle-Specific Fender Interface

Check the corner radius, edge return and clip spacing against the original opening before installation.

For KIA Picanto JA 2017, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.

Lens Design and Powered Components

Its optical face and electrical mode work together, so reflector appearance alone cannot prove compatibility.

Inspect connector keying, terminal count and cable exit direction before connecting the replacement lamp. Lens colour and reflector texture should also be compared under neutral lighting.

Practical Fitment Check

Finish with a visual alignment check and an electrical function test where wiring is present.

Place the unit on clean protective material with the connector and mounting legs free from load. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.

Automotive Component Specifications

Product type: Fender Light / Side Marker Lamp

Primary OE reference: 92303-1Y000

Cross-reference numbers: 92303-1Y000

Internal item code: KA04005-009

Vehicle brand: KIA

Vehicle model: Picanto JA

Model year: 2017

Installation position: Front fender / side marker opening

Side / orientation: Left

Wholesale Supply and Packing

Repeat orders should reference the approved vehicle application and installation side. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.

Frequently Asked Questions

How should 92303-1Y000 compatibility be confirmed?

Match the OE reference, KIA Picanto JA production year, installation side, connector and hidden mounting geometry.

Can left and right fender lamps be exchanged?

Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.

What should be checked before installation?

Measure the housing projection and compare every moulded locator with the removed component. Check the connector latch by hand and avoid using wire tension to hold the plug against the lamp body.

What test is recommended after fitting?

Clean the opening, engage the guide features first and press only at supported areas of the housing.

Which details are needed for a wholesale quote?

A consolidated offer can separate powered lamps, passive markers and colour variants into clear order lines.

Need a quotation? Contact AutoParts with the OE reference, vehicle details, side, quantity and destination.

Physical comparison: Match the narrow and wide ends of the lens to the original fender orientation before trial fitting.

Lighting function: Depending on vehicle specification, the assembly may operate as a side repeater, marker lamp or combined signal unit.

Electrical check: Check polarity and connector engagement on powered versions without modifying the factory harness.

Installation guidance: Seat the locating peg before the spring clip and watch the painted edge for any sign of interference.

Selection context: Compare the supplied rear view with the removed lamp rather than relying on a front-only marketplace photo.

Product handling: Before fitting, inspect the lens, seal, connector and mounting tabs for transport damage.

Wholesale enquiry: Trade enquiries should identify lens colour and connector type when these vary by market.