92208-G6100 Daytime Running Light for KIA Picanto 2021 Right

92208-G6100 Daytime Running Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 92208-G6100 is catalogued as a daytime running light for KIA Picanto 2021, installed at the right front bumper position.

92208-G6100 — Lighting Function and Application

A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 92208-G6100 on the listed Picanto, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-092.

For SKU KA04002-092, separate standard, LED and multi-lens versions in the purchase list. Quoting 92208-G6100 with the KIA Picanto 2021 and right position helps separate lighting-technology and model-year variants during packing.

KA04002-092 — OE and Vehicle Fitment Checks

Start with the full reference 92208-G6100; then verify that the listed side matches the vehicle. Item KA04002-092 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed daytime running light.

92208-G6100 — Housing, Lens and Electrical Interface

Use the 92208-G6100 page photographs to compare projector or multi-lens features where fitted. For electrical compatibility on SKU KA04002-092, confirm that the connector seats fully without forcing the lock and confirm the plug reaches its locked position without modification.

KA04002-092 — Installation Planning

Before securing 92208-G6100, inspect damaged brackets before installing the replacement. After connecting SKU KA04002-092, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Daytime Running Light

Primary OE reference: 92208-G6100

Cross-reference numbers: 92208-G6100

Internal item code: KA04002-092

Vehicle brand: KIA

Vehicle model: Picanto

Model year: 2021

Installation position: Front bumper

Installation side: Right

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92208-G6100, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU KA04002-092, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

Does 92208-G6100 include a bulb or control module?

The supply scope for 92208-G6100 follows the SKU KA04002-092 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

Is 92208-G6100 interchangeable between left and right sides?

No interchangeability should be assumed. The right housing, reflector orientation and brackets must correspond to the original bumper position.

How do I confirm 92208-G6100 for my vehicle?

Match 92208-G6100, the right position, vehicle year, housing depth, mounting ears and electrical connector with the original KIA lamp.

What if the original number for 92208-G6100 is unreadable?

To compare SKU KA04002-092, send clear front, rear, connector and mounting-point photographs together with the KIA model, year and installation side.

How is the 92208-G6100 optical surface protected for shipping?

Packing for SKU KA04002-092 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.

Request a Product-Specific Quote

Send the complete OE reference 92208-G6100, internal number KA04002-092, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.