92202-1W510 Fog Light for KIA Rio 2016 Right

92202-1W510 Fog Light Product Overview

This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 92202-1W510 is catalogued as a fog light for KIA Rio 2016, installed at the right front bumper position. The source record identifies the lighting version as LED, sedan application.

92202-1W510 — Lighting Function and Application

The unit occupies a defined bumper opening, so housing depth and bracket geometry are as important as the lens shape. For 92202-1W510 on the listed Rio, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-110.

For SKU KA04002-110, list mixed left/right quantities separately. Quoting 92202-1W510 with the KIA Rio 2016 and right position helps separate lighting-technology and model-year variants during packing.

KA04002-110 — OE and Vehicle Fitment Checks

Start with the full reference 92202-1W510; then check whether the original unit uses a separate bulb holder. Item KA04002-110 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light.

92202-1W510 — Housing, Lens and Electrical Interface

Use the 92202-1W510 page photographs to compare the optical face and edge seal. For electrical compatibility on SKU KA04002-110, confirm the harness reaches the lamp without tension and confirm the plug reaches its locked position without modification.

KA04002-110 — Installation Planning

Before securing 92202-1W510, avoid touching a replacement bulb glass with bare fingers. After connecting SKU KA04002-110, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92202-1W510

Cross-reference numbers: 92202-1W510

Internal item code: KA04002-110

Vehicle brand: KIA

Vehicle model: Rio

Model year: 2016

Installation position: Front bumper

Installation side: Right

Lighting version: LED, sedan application

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92202-1W510, inner protection is arranged around the housing and connector so the optical surface does not carry the package load. For SKU KA04002-110, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.

Frequently Asked Questions

What information is useful for a wholesale quotation?

Provide 92202-1W510, SKU KA04002-110, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Does 92202-1W510 include a bulb or control module?

The supply scope for 92202-1W510 follows the SKU KA04002-110 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

What if the original number for 92202-1W510 is unreadable?

To compare SKU KA04002-110, send clear front, rear, connector and mounting-point photographs together with the KIA model, year and installation side.

How should 92202-1W510 be installed?

For item KA04002-110, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

What should be checked on the connector for 92202-1W510?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Rio application.

Request a Product-Specific Quote

Send the complete OE reference 92202-1W510, internal number KA04002-110, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Use the product photos to compare the optical face, rear shell and surrounding clearance.

Mounting comparison: Confirm the mounting ears, bolt-hole spacing and bracket angles align with the vehicle opening.

Electrical connection: Compare the plug profile, pin arrangement and socket direction with the removed unit.

Installation guidance: Route the wiring away from sharp edges and confirm the lamp sits level in the opening.

Quotation information: For quotation, provide the OE number, vehicle details, installation side and required quantity.