92201-A7000 Fog Light for KIA K3 2013 Left

92201-A7000 Fog Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 92201-A7000 is catalogued as a fog light for KIA K3 2013, installed at the left front bumper position.

92201-A7000 — Product Function for the Listed Vehicle

Rear fog lamp versions provide a high-intensity warning signal and must be matched to the correct rear position. For 92201-A7000 on the listed K3, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-173.

For SKU KA04002-173, separate standard, LED and multi-lens versions in the purchase list. Quoting 92201-A7000 with the KIA K3 2013 and left position helps separate lighting-technology and model-year variants during packing.

KA04002-173 — Fitment Evidence to Compare

Start with the full reference 92201-A7000; then verify every mounting ear before approving quantity. Item KA04002-173 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

92201-A7000 — Lighting Hardware Details

Use the 92201-A7000 page photographs to check the aiming mechanism and ventilation features. For electrical compatibility on SKU KA04002-173, confirm that the connector seats fully without forcing the lock and confirm the plug reaches its locked position without modification.

KA04002-173 — Installation Sequence

Before securing 92201-A7000, avoid touching a replacement bulb glass with bare fingers. After connecting SKU KA04002-173, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92201-A7000

Cross-reference numbers: 92201-A7000

Internal item code: KA04002-173

Vehicle brand: KIA

Vehicle model: K3

Model year: 2013

Installation position: Front bumper

Installation side: Left

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92201-A7000, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware. For SKU KA04002-173, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

Why compare the bumper opening for 92201-A7000?

SKU KA04002-173 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.

How should 92201-A7000 be installed?

For item KA04002-173, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

What information is useful for a wholesale quotation?

Provide 92201-A7000, SKU KA04002-173, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Can model year alone confirm 92201-A7000 fitment?

No. For SKU KA04002-173, vehicles built in the same year can use different lighting packages, so use 92201-A7000 and the removed lamp geometry as the primary evidence.

What should be checked on the connector for 92201-A7000?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the K3 application.

Request a Product-Specific Quote

Send the complete OE reference 92201-A7000, internal number KA04002-173, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.