92201-4X500 Fog Light for KIA K2 2014 Left

92201-4X500 Fog Light Product Overview

This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 92201-4X500 is catalogued as a fog light for KIA K2 2014, installed at the left front bumper position. The source record identifies the lighting version as standard version.

92201-4X500 — Application Overview

The unit occupies a defined bumper opening, so housing depth and bracket geometry are as important as the lens shape. For 92201-4X500 on the listed K2, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-133.

For SKU KA04002-133, list mixed left/right quantities separately. Quoting 92201-4X500 with the KIA K2 2014 and left position helps separate lighting-technology and model-year variants during packing.

KA04002-133 — Physical Comparison Before Ordering

Start with the full reference 92201-4X500; then check whether the original unit uses a separate bulb holder. Item KA04002-133 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

92201-4X500 — Lamp Construction and Electrical Match

Use the 92201-4X500 page photographs to compare the optical face and edge seal. For electrical compatibility on SKU KA04002-133, confirm the harness reaches the lamp without tension and confirm the plug reaches its locked position without modification.

KA04002-133 — Fitting Guidance

Before securing 92201-4X500, avoid touching a replacement bulb glass with bare fingers. After connecting SKU KA04002-133, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92201-4X500

Cross-reference numbers: 92201-4X500

Internal item code: KA04002-133

Vehicle brand: KIA

Vehicle model: K2

Model year: 2014

Installation position: Front bumper

Installation side: Left

Lighting version: standard version

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92201-4X500, inner protection is arranged around the housing and connector so the optical surface does not carry the package load. For SKU KA04002-133, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.

Frequently Asked Questions

What information is useful for a wholesale quotation?

Provide 92201-4X500, SKU KA04002-133, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Can model year alone confirm 92201-4X500 fitment?

No. For SKU KA04002-133, vehicles built in the same year can use different lighting packages, so use 92201-4X500 and the removed lamp geometry as the primary evidence.

What should be checked on the connector for 92201-4X500?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the K2 application.

Does 92201-4X500 include a bulb or control module?

The supply scope for 92201-4X500 follows the SKU KA04002-133 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

Is 92201-4X500 interchangeable between left and right sides?

No interchangeability should be assumed. The left housing, reflector orientation and brackets must correspond to the original bumper position.

Request a Product-Specific Quote

Send the complete OE reference 92201-4X500, internal number KA04002-133, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.