92201-1Y500 Fog Light for KIA Picanto 2014 Left

92201-1Y500 Fog Light Product Overview

This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 92201-1Y500 is catalogued as a fog light for KIA Picanto 2014, installed at the left front bumper position.

92201-1Y500 — Lighting Function and Application

The lamp assembly works with the vehicle harness, switch logic and surrounding bumper trim as one installation system. For 92201-1Y500 on the listed Picanto, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-069.

For SKU KA04002-069, request carton marking before a repeat export order. Quoting 92201-1Y500 with the KIA Picanto 2014 and left position helps separate lighting-technology and model-year variants during packing.

KA04002-069 — OE and Vehicle Fitment Checks

Start with the full reference 92201-1Y500; then check the connector key and terminal count. Item KA04002-069 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

92201-1Y500 — Housing, Lens and Electrical Interface

Use the 92201-1Y500 page photographs to review the visible lens pattern and housing finish. For electrical compatibility on SKU KA04002-069, verify bulb specification before transferring reusable parts and confirm the plug reaches its locked position without modification.

KA04002-069 — Installation Planning

Before securing 92201-1Y500, inspect damaged brackets before installing the replacement. After connecting SKU KA04002-069, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92201-1Y500

Cross-reference numbers: 92201-1Y500

Internal item code: KA04002-069

Vehicle brand: KIA

Vehicle model: Picanto

Model year: 2014

Installation position: Front bumper

Installation side: Left

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92201-1Y500, protective wrapping limits abrasion on the lens while keeping the electrical connection dry and clean. For SKU KA04002-069, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.

Frequently Asked Questions

Can model year alone confirm 92201-1Y500 fitment?

No. For SKU KA04002-069, vehicles built in the same year can use different lighting packages, so use 92201-1Y500 and the removed lamp geometry as the primary evidence.

Why compare the bumper opening for 92201-1Y500?

SKU KA04002-069 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.

How do I confirm 92201-1Y500 for my vehicle?

Match 92201-1Y500, the left position, vehicle year, housing depth, mounting ears and electrical connector with the original KIA lamp.

What should be checked on the connector for 92201-1Y500?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Picanto application.

How should 92201-1Y500 be installed?

For item KA04002-069, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

Request a Product-Specific Quote

Send the complete OE reference 92201-1Y500, internal number KA04002-069, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.