92201-1Y000 Fog Light for KIA Picanto 2011 Left

92201-1Y000 Fog Light Product Overview

This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 92201-1Y000 is catalogued as a fog light for KIA Picanto 2011, installed at the left front bumper position. The source record identifies the lighting version as base version.

92201-1Y000 — Purpose in the Lighting System

The lamp assembly works with the vehicle harness, switch logic and surrounding bumper trim as one installation system. For 92201-1Y000 on the listed Picanto, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU KA04002-065.

For SKU KA04002-065, identify any market-specific lighting equipment. Quoting 92201-1Y000 with the KIA Picanto 2011 and left position helps separate lighting-technology and model-year variants during packing.

KA04002-065 — OE Reference and Side Confirmation

Start with the full reference 92201-1Y000; then check the connector key and terminal count. Item KA04002-065 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

92201-1Y000 — Lens, Housing and Plug Review

Use the 92201-1Y000 page photographs to compare the heat shield, bulb seat and rear cap layout. For electrical compatibility on SKU KA04002-065, compare plug locking tabs and wiring direction and confirm the plug reaches its locked position without modification.

KA04002-065 — Replacement Preparation

Before securing 92201-1Y000, inspect damaged brackets before installing the replacement. After connecting SKU KA04002-065, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92201-1Y000

Cross-reference numbers: 92201-1Y000

Internal item code: KA04002-065

Vehicle brand: KIA

Vehicle model: Picanto

Model year: 2011

Installation position: Front bumper

Installation side: Left

Lighting version: base version

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92201-1Y000, protective wrapping limits abrasion on the lens while keeping the electrical connection dry and clean. For SKU KA04002-065, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.

Frequently Asked Questions

How is the 92201-1Y000 optical surface protected for shipping?

Packing for SKU KA04002-065 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.

What information is useful for a wholesale quotation?

Provide 92201-1Y000, SKU KA04002-065, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Does 92201-1Y000 include a bulb or control module?

The supply scope for 92201-1Y000 follows the SKU KA04002-065 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

What if the original number for 92201-1Y000 is unreadable?

To compare SKU KA04002-065, send clear front, rear, connector and mounting-point photographs together with the KIA model, year and installation side.

How should 92201-1Y000 be installed?

For item KA04002-065, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

Request a Product-Specific Quote

Send the complete OE reference 92201-1Y000, internal number KA04002-065, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Compare the lens outline, rear housing depth and adjustment points with the removed lamp.

Mounting comparison: Compare every locating tab, fixing hole and support bracket with the original lamp assembly.

Electrical connection: Verify the electrical socket and locking feature before connecting the vehicle wiring.

Installation guidance: Dry-fit the lamp first, align the bumper opening and tighten the fasteners evenly.

Quotation information: State the OE reference, model year, mounting side and order quantity when requesting a quote.